Just a little ceramic information to share as a potter. Vitrified simply means the clay has become glass like by being fired to its proper maturing temperature. Usually ceramic tile means it is a lower temperature clay like earthenware or terra cotta. Porcelain is fired to the highest temperature and is more vitrified if you will. This usually means it is less porous to to absorb water and harder. Low fired ceramics with glazes much darker or lighter than the clay body will show chips easier. Rectified has to do with making the edges precise enough to fit smoothly together for less grout lines. So porcelain cost more to produce but it is more sturdy. All clay tiles should be vitrified.

antislip and easy maintainance tiles for exterior is the key. choose any shade, colour, size. must not have deep textures as that's gonna be tough later in use. do consider slope and drainage appropriately as terrace may lead to water proofing issues in future. make sure skirting is everywhere and corners with top part of the balcony wall is tiled properly. thanks shradha shah beescheese design

Hello. As you rightly mentioned, there are lots of varieties of tiles available in the market today, including the wooden pattern ones. These designs are offered by almost all the leading tile companies. Well, the patterns/designs are usually on individual's preference, but a natural teak wood pattern would give a natural look as you requested. More than the designs of the tiles, the points that I would suggest to take care of before choosing a pattern is 1. It should not be too dark as it will make the room look smaller 2. It can have a decent amount of texture finish, but shouldn't be over board as it will be a hindrance to walk freely and also cleaning would be a pain. 3 The thickness of the tile, many good companies be of standard quality 4. Easy availability of the tile, in case you have to replace the broken tiles, they should be easily available. About matching the floor with your walls and ceiling, do not replicate what is on the floor (color/pattern), instead go for something lighter in shades (wallpapers or paints) for walls and for ceiling you can consider the wooden theme PVC panels, which are available in multiple colors.

I have the same kind of bathroom and saw the same video. I used an angle grinder to remove one of the walls. You have to have hearing, breathing, and eye protection. I don't think there is any way to avoid the dust. I'm going to direct a fan to an open window in the bathroom. My sinks are top mount so there was no problem removing it. I replaced the faucet only for now. I also changed out the drain and stopper. The old one was rusted to the sink. I had to bang on it with my loader from my tractor with the sink upside down to get it off, lol. I have put off removing the rest of the wall and the cabinet because it is such an ordeal. You might check with Daltile to see if they still make the tile. Maybe try cutting away the cabinet while keeping the counterop supported and then dropping it so that the joint gets more exposed? I'll be interested to know if you get to this before me but I'm doing an entire gut job.