Pewter Colour Designs & Ideas
Industville
Small metal cone pendant shade in brass finish.
Vintage industrial antique retro style metal lighting fixture, ideal for urban homes, modern loft conversion flats, bars, restaurants and hotels.
Hand crafted lighting fixture
Shape: Cone
Colour: Brass (same colour inside)
Dimensions:
Shade diameter: 16.5cm /6½"
Height including the holder: 24cm/9½”
Height without holder: 15cm/6"
Ceiling rose diameter: 12 cm/ 4¾"
Material of shade: Metal
Ceiling rose in dark pewter and top quality fabric flex included - 1m / 39" - ready to be installed, installation needed, ceiling mount screws/brackets not included (longer flex available on request)
Also available is Brooklyn Vintage 5 wire Pendant Light which can be used with all Brooklyn shades, simply purchase the shade only option.
Fitting variation available - Brass or Pewter holder, alternatively the shade can be purchased without the holder.
Bulb required: standard screw E27 - not included, max 40W. All of our suggested LED bulbs are compatible with the fittings- please see our range of Edison vintage bulbs
Reproduction, designed to look vintage.
The antique vintage finish of all our products is handmade and each item is original and unique and therefore may vary slightly in shade to those shown in the photographs.
Photography Credit:
Andy Haslam Photography
Snook Architects, Liverpool
Kitchen Solvers of North Dallas
For this kitchen remodeling project, the homeowner was looking to give their kitchen a fresh and brighter look. The existing cabinets were in good shape, so cabinet refacing was the perfect solution for them. They went with our Andale door done in maple and in a white color with a pewter glaze from the Kitchen Solvers Classic Collection line. Next, we replaced the existing granite countertop with a new quartz Montclair white countertop. To complete the new look, we installed a new luxury vinyl tile floor. Now this is the kitchen this homeowner has been dreaming of.
Industville
Small metal cone pendant shade in brass finish.
Vintage industrial antique retro style metal lighting fixture, ideal for urban homes, modern loft conversion flats, bars, restaurants and hotels.
Hand crafted lighting fixture
Shape: Cone
Colour: Brass (same colour inside)
Dimensions:
Shade diameter: 16.5cm /6½"
Height including the holder: 24cm/9½”
Height without holder: 15cm/6"
Ceiling rose diameter: 12 cm/ 4¾"
Material of shade: Metal
Ceiling rose in dark pewter and top quality fabric flex included - 1m / 39" - ready to be installed, installation needed, ceiling mount screws/brackets not included (longer flex available on request)
Also available is Brooklyn Vintage 5 wire Pendant Light which can be used with all Brooklyn shades, simply purchase the shade only option.
Fitting variation available - Brass or Pewter holder, alternatively the shade can be purchased without the holder.
Bulb required: standard screw E27 - not included, max 40W. All of our suggested LED bulbs are compatible with the fittings- please see our range of Edison vintage bulbs
Reproduction, designed to look vintage.
The antique vintage finish of all our products is handmade and each item is original and unique and therefore may vary slightly in shade to those shown in the photographs.
Photography Credit:
Andy Haslam Photography
Fat Walrus, New Cross
Find the right local pro for your project
Industville
Small metal cone pendant shade in brass finish.
Vintage industrial antique retro style metal lighting fixture, ideal for urban homes, modern loft conversion flats, bars, restaurants and hotels.
Hand crafted lighting fixture
Shape: Cone
Colour: Brass (same colour inside)
Dimensions:
Shade diameter: 16.5cm /6½"
Height including the holder: 24cm/9½”
Height without holder: 15cm/6"
Ceiling rose diameter: 12 cm/ 4¾"
Material of shade: Metal
Ceiling rose in dark pewter and top quality fabric flex included - 1m / 39" - ready to be installed, installation needed, ceiling mount screws/brackets not included (longer flex available on request)
Also available is Brooklyn Vintage 5 wire Pendant Light which can be used with all Brooklyn shades, simply purchase the shade only option.
Fitting variation available - Brass or Pewter holder, alternatively the shade can be purchased without the holder.
Bulb required: standard screw E27 - not included, max 40W. All of our suggested LED bulbs are compatible with the fittings- please see our range of Edison vintage bulbs
Reproduction, designed to look vintage.
The antique vintage finish of all our products is handmade and each item is original and unique and therefore may vary slightly in shade to those shown in the photographs.
Photography Credit:
Andy Haslam Photography
Snook Architects, Liverpool
Industville
Evoking early-20th-century industrial lighting, our reproductions of vintage fixtures retain the classic lines and exposed hardware of the originals. Designed to showcase the warmth of Edison-style filament bulbs.
Hand crafted lighting fixture
Shape: Umbrella
Colour: Brass (same colour inside)
Dimensions:
Shade diameter: 20cm/8"
Height including the holder: 14.5cm/6"
Height without holder: 5.5cm/2¼"
Ceiling rose diameter: 12 cm/ 4¾"
Material of shade: Metal
Ceiling rose in dark pewter and top quality fabric flex included - 1m / 39" - ready to be installed, installation needed, ceiling mount screws/brackets not included (longer flex available on request)
Also available is Brooklyn Vintage 5 wire Pendant Light which can be used with all Brooklyn shades, simply purchase the shade only option.
Fitting variation available - Brass, Pewter or Chain holder, alternatively the shade can be purchased without the holder.
Bulb required: standard screw E27 - not included, max 40W. All of our suggested LED bulbs are compatible with the fittings - see our range of Edison vintage bulbs
Reproduction, designed to look vintage.
The antique vintage finish of all our products is handmade and each item is original and unique and therefore may vary slightly in shade to those shown in the photographs.
Photography Credit:
Andy Haslam Photography
Snook Architects, Liverpool
Industville
Evoking early-20th-century industrial lighting, our reproductions of vintage fixtures retain the classic lines and exposed hardware of the originals. Designed to showcase the warmth of Edison-style filament bulbs.
Hand crafted lighting fixture
Shape: Umbrella
Colour: Brass (same colour inside)
Dimensions:
Shade diameter: 20cm/8"
Height including the holder: 14.5cm/6"
Height without holder: 5.5cm/2¼"
Ceiling rose diameter: 12 cm/ 4¾"
Material of shade: Metal
Ceiling rose in dark pewter and top quality fabric flex included - 1m / 39" - ready to be installed, installation needed, ceiling mount screws/brackets not included (longer flex available on request)
Also available is Brooklyn Vintage 5 wire Pendant Light which can be used with all Brooklyn shades, simply purchase the shade only option.
Fitting variation available - Brass, Pewter or Chain holder, alternatively the shade can be purchased without the holder.
Bulb required: standard screw E27 - not included, max 40W. All of our suggested LED bulbs are compatible with the fittings - see our range of Edison vintage bulbs
Reproduction, designed to look vintage.
The antique vintage finish of all our products is handmade and each item is original and unique and therefore may vary slightly in shade to those shown in the photographs.
Photography Credit:
Andy Haslam Photography
Snook Architects, Liverpool
Industville
Small metal cone pendant shade in brass finish.
Vintage industrial antique retro style metal lighting fixture, ideal for urban homes, modern loft conversion flats, bars, restaurants and hotels.
Hand crafted lighting fixture
Shape: Cone
Colour: Brass (same colour inside)
Dimensions:
Shade diameter: 16.5cm /6½"
Height including the holder: 24cm/9½”
Height without holder: 15cm/6"
Ceiling rose diameter: 12 cm/ 4¾"
Material of shade: Metal
Ceiling rose in dark pewter and top quality fabric flex included - 1m / 39" - ready to be installed, installation needed, ceiling mount screws/brackets not included (longer flex available on request)
Also available is Brooklyn Vintage 5 wire Pendant Light which can be used with all Brooklyn shades, simply purchase the shade only option.
Fitting variation available - Brass or Pewter holder, alternatively the shade can be purchased without the holder.
Bulb required: standard screw E27 - not included, max 40W. All of our suggested LED bulbs are compatible with the fittings- please see our range of Edison vintage bulbs
Reproduction, designed to look vintage.
The antique vintage finish of all our products is handmade and each item is original and unique and therefore may vary slightly in shade to those shown in the photographs.
Photography Credit:
Andy Haslam Photography
Snook Architects, Liverpool
Industville
Small metal cone pendant shade in brass finish.
Vintage industrial antique retro style metal lighting fixture, ideal for urban homes, modern loft conversion flats, bars, restaurants and hotels.
Hand crafted lighting fixture
Shape: Cone
Colour: Brass (same colour inside)
Dimensions:
Shade diameter: 16.5cm /6½"
Height including the holder: 24cm/9½”
Height without holder: 15cm/6"
Ceiling rose diameter: 12 cm/ 4¾"
Material of shade: Metal
Ceiling rose in dark pewter and top quality fabric flex included - 1m / 39" - ready to be installed, installation needed, ceiling mount screws/brackets not included (longer flex available on request)
Also available is Brooklyn Vintage 5 wire Pendant Light which can be used with all Brooklyn shades, simply purchase the shade only option.
Fitting variation available - Brass or Pewter holder, alternatively the shade can be purchased without the holder.
Bulb required: standard screw E27 - not included, max 40W. All of our suggested LED bulbs are compatible with the fittings- please see our range of Edison vintage bulbs
Reproduction, designed to look vintage.
The antique vintage finish of all our products is handmade and each item is original and unique and therefore may vary slightly in shade to those shown in the photographs.
Photography Credit:
Andy Haslam Photography
Snook Architects, Liverpool
YD Estates
Relaxed and tranquil living room with main colour being white and accented with ethnic silverleaf/ pewter coffee table resting on matt, wide planked oak flooring. A marble round side table where a pestle and mortar and silver mirrored vase sit complements the coffee table. The ash grey dining table with comfortable, lavender chairs look out onto the view of the city and balcony with pots and plants.
Bezooyen Contracting Inc
Vinyl Tile: Centura Dura Contract Denim Cinerious.
Walls: HC172 Revere Pewter Benjamin Moore.
Trim: CC-40 Cloud White Benjamin Moore.
Ceiling: HC143 Wythe Blue Benjamin Moore.
Sink Faucet: Delta vero widespread chrome lav faucet.
Cabinets: flat plywood painted maple veneer.
Counter Backsplash: 4 by 8 white beveled.
Mosaic tub skirt: Ames bliss glass and stone 5/8”by 5/8”BS158 Iceland.
Tub Surround: Colour and dimension Collection Arctic White Bright.
Mosaic strip: Ames bliss glass & stone bsis iceland.
Shower: Hytec 4821 F/G shower / right hand seat.
Shower door: silver obscure 43 by 68.5.
Toilet: Kohler Archer comfort height white closet combination.
Sink: Kohler archer white8”centre basin.
Tub: Hytec AC3666 white drop-in soaker tub.
Pewter Colour Designs & Ideas
Care Free Homes, Inc.
GAF Timberline HD Roofing System in the color, Pewter Gray. Mastic Carvedwood 44 Vinyl Siding in the color, Scottish Thistle. Fabricated Aluminum Trim in the color, Classic Cream. Photo Credit: Care Free Homes, Inc.
159