You are going to have to leave your comfort zone on this one. Walnut is "brown", you have "pink" as a counter top. I would suggest going with another version of the colours already in the room. you have gray/beige and white. I would hesitate going white...but it can be done. You can move into the grays and be very happy (it would look very modern) or you can move into a beige that holds a hint of pink in it (not pink...but a blush of warmth). Or you could go really wonky and add in something like a brushed stainless steel look to the cabinets and have it go "space age". There are specs of blue/gray in this counter top. The next think to look at is an "ashwood" or dark gray wood presentation that has some blue in it. It would lighten the space yet still add drama that dark cabinetry offers.

Effectiveness is influenced by capacity of unit. If you are trying to mount a 270 cfm fan more than 30" above cooktop, then it may make noise but will do little to clear the air. If it is 1000 cfm, then it can be higher than 30". So the answer is "it depends". Most people don't mount them more than 36" above the cooktop unless it is a really high powered unit.

Keya, glad you decided to take the one reader's idea about moving the armoires in front of windows that you don't need and giving the bed a wall of its own! And, yes, you can have Roman shades on one wall and layered drapes on the other. When I had drapes made for my tall sitting room windows/doors, I had them use the same fabric for the Roman shades for the smaller windows on the other wall. For me personally, in these older Indian homes with all the odd nooks and niches in the walls, perhaps it would be more soothing to have a light/med tone paint on the walls that blends with the drapes/blinds for an 'uninterrupted' look, and I would use the same color on ceiling and beams. (but that is just my thought) I would start the process with a large carpet with your favorite colors, then choose your Bedcover & cushions, then your wall paint and fabric for drapes/blinds ..Not certain what style you like, but if you really like a particular Ethnic bedcover fabric, you can always have them stitched into curtains or Roman shades too. Can't wait to see the "After" pics!

Hi Cornerstone, I read your feedback 1. Profile handles I was late as the doors were already ready and it was too much of re-work. Regarding putting handles 2. Sharp edge can cause problem thats why the handles I have put are rounded on the edge not to hurt. 3. Where I did make a mistake was Did not put fillers. If I had put fillers on the sides the door issues could be resolved The upper cabinet handles. This is actually not my fault I had told them to put the handles in the center but they thought these are not drawers but rather cabinets so they should be put in the location where we put the vertical handles. By the time I came to check it was too late and now I am stuck. I am thinking of putting maybe 8inch handles instead of current 5inch but not sure if that would help to improve the look. Old kitchen pictures attached they also had handles but smaller