I would not mix LED and CFL they have different looks and LED s are much cheaper to run. You can find a fixture you like and switch out most with LEDs, we have been slowly changing all of our halogen lighting to LEDs now that the LEDs come in higher wattages. We have 70 halogen lights in our house so I am doing 12 at a time, love the change. I like the fact that you can have a lot more lights off the same circuit too.

OK... but the wire wont be lower as it is fixed now. The wire in the pics below is the wall facing each other. They were leveled on equal height but the beam on one wall makes it seem a little above. But i think you guys are absolutely right that up and down lights wont look good there. I think you are right about down lights lessismoore. Would it look good if i go with two different lights on opposite walls??? it would look odd right.

hey digital logic systems and clear lighting and electrical design .. well I would like to recreate the exact same or at least closest effect possible seen in the picture I posted ..going by the projector home theater I wouldnt be wanting too much lights so decided to graze the on the wall just like these ones seen in the picture cause im gonna use the same colors for the fabric .. the problem is not the wall grazing part. . but how to do the grazing and illuminate the floors so well as seen in the picture .. I thank you for the time you have invested . hope to hearing ur replies

The energy efficient bulbs shown in the above photo suck the light is awful and they butn out quite often, if you want real energy savings go with LEDs they come in warm or cool light and you probably never have to chang a bulb as long as you live. They come in all kinds of wattages and can be retrofitted in almost any fixture.