HI RinaI do agree I love jewelbox rooms, but I consider them more cosy ... and with a grey marble floor it goes all Versace Italianate! I am trying to balance the colours by bringing in a pattern on the covers rather than plain. I feel this will bring colour without overpowering the room. In the pictures I showed above, the rooms are basically neutral but the colour is brought in via pattern - I think this might be the way to go...Ideally a green or blue on a subdued grey would be the best, but I dont know what the market is like for Sumit...Cushions can do a lot to tie in the other white/grey elements.Shelley - navy is a good suggestion, but as Sumits area is quite tall and thin, trying to keep the general area light Any more suggestions most welcome. These are just ideas after all and Sumit will choose what works for the room in the end ;-)

I had purchased hafele hob 10 months back... I got it serviced 6 times... Now i requested for replacement with new one... Still they have not attended my request...

I suggest you follow the step-by-step guide for creating storage cabinets under the bathroom sink. Take proper measurements - Measure the available available space in height, width and height. Cut Plywood to size - With a circular saw and framing square, cut all the required pieces out. You can use a sliding compound saw as an alternative. Attach the base and sides - Start assembling the sink cabinets by placing the bottom piece of plywood sheet on a flat surface. Attach the back and top boards - Place the plywood sheet for the top part of the cabinet and attach wood screws to connect it to both the sides. Turn the back faces of the cabinet upwards. Keep the back piece over the structure and fix it into place with wood screws. Attach shelves - Place the cabinet in an upright position to install the shelves. Slide a shelf into the structure so it is flush against the back. Attach door - Keep both hinges of the door on the same side of the plywood sheet. Drill them using wood screws into place. Now keep the door over the cabinet structure, extend the hinges to one of the side panels and fix them to make them secure. Fix a hasp closure on the other side of the door, placing it in the center of the hinges.

Hello @Cornerstone Design Studio India No. I don't have any idea about FSI. I will try to learn more about it. Regarding the size of green belt, I have confirmed it from the patwari that Plot 1 has got 5 metre green belt on both sides. He told me that: All plots with 24 metre facing road are having 5 metre green belt whereas plots with 12 metre facing road are having 2.5 metre green belt. (It's 4 or 3.5 metre in case of 18 metre road, I don't remember exactly). About that bold line, I am sure that it is not representing width of green belt. (Check below image as that bold line is having same width for 12 metre facing plots). So what do you think now? Should I become that lucky guy to own plot 1? Check out whole map and there are hardly 3-4 corner plots which are having 24 metre wide road on both sides. (and there are just 2 plots having North East direction) whereas there are around 50-55 plots which are similar to Plot 2nd. About your query, It's Suncity Township - I (Sector 35, Rohtak). It's around 45 kilometres away from Delhi border. Would you please mind elaborating this point a little bit more - "For us function prevails over design anyday". If built up area is going to be same in both plots then how it affects functionality? Thanks a lot for your detailed input.