Hello, It depends on the thickness of the veneer used earlier. If you are lucky and a thick veneer was used then it can be repolished. You need to get it inspected. Costlier option would be to have it veneered again. And if you are not repulsed to paint, as you seem to be to laminates, even that is a viable option. Thanks. Amit CORNERSTONE DESIGNS Bangalore.

Hi Cornerstone, I read your feedback 1. Profile handles I was late as the doors were already ready and it was too much of re-work. Regarding putting handles 2. Sharp edge can cause problem thats why the handles I have put are rounded on the edge not to hurt. 3. Where I did make a mistake was Did not put fillers. If I had put fillers on the sides the door issues could be resolved The upper cabinet handles. This is actually not my fault I had told them to put the handles in the center but they thought these are not drawers but rather cabinets so they should be put in the location where we put the vertical handles. By the time I came to check it was too late and now I am stuck. I am thinking of putting maybe 8inch handles instead of current 5inch but not sure if that would help to improve the look. Old kitchen pictures attached they also had handles but smaller

Pls share the pictures

Here is a solution to this of u can’t find acrylic or laminate of the same colour the u can get it pained from Asian paints they have a huge variety of painting solutions with whatever shade u want. So what u can do is get the core material of plywood and put mdf on it to get a smoother and even surface and then ask Asian paints to get it painted for u I think it will we cheaper as well as u can get ur desired shade