Hi Manas, There is one option i.e. if you don't want to do any major changes you will have to take the wiring from sofa wall till TV wall and you can hide it using conduit. Or You can take a grove from one wall till the partition wall and get it filled. Partition is supposed to be a ply wall of 3 inches which will have framework in center and ply on either sides. We are attaching two reference images one with designer panel and one with plane. You can use whichever you like. We hope this will help you achieve your required design. In case of doubt, queries are most welcome. Best Regards Team Offroad

hi, general the 7 feet, your architect is right, he is trying to give you a grand and luxurious openings, i mean all from entrance to bathroom doors, i have done this before for a bungalow project. once you do interiors, sizes get shortened by wall cladding and framing to the doors. make sure you ceiling heights are more than conventional 8'9" or so.

Rahul, You were advised in good faith about 24 inches door. Because of the bigger size the weight of the door increases and chances of it tilting towards far end of it increases . Wood has a tendency to warp a bit in a bigger door the effect is more visible, You may also need to support them with stronger hardware. And don't forget that bigger doors need bigger space in the room. Make sure you have sufficient space to open them. These are few suggestions that would help you achieve your goal . 1- Preferably use cut hinges made in brass otherwise increase the number of hinges by a pair to ensure load is taken care of. 2- You can reduce the height of doors by using external drawers in the plan 3- Coming to the shutters, go for atleast a genuine Century Winstar or Green Gold board for the shutters.This is a must. No compromises and no alternatives are recommended here. Don't use a ply for the shutter. Keep the shutters always closed and locked and use magnets to hold them in place. 4- Both sides of the shutter must be laminated properly in one go. You should be good if these are taken care of. Thanks, Nitin CORNERSTONE DESIGNS Bangalore

Sangita, There is another option, which involves some additional costs.It's called a transom window. It will make the door appear bigger and also offer ventilation . Usually, it is made in the same frame but it can also be added later on. Check with your designer if it she can add it now. Some images are attached for your reference.You can also add moldings to the final frame to increase the height visually. We wouldn't recommend you bringing the ceiling down using a false ceiling. You can use it to cut say 6-7 inches but not more than that. Thanks, Nitin Cornerstone Designs, Bangalore.