Unfortunately all your options require custom work: It looks like you need an 18" corner cabinet. You will have to modify the last wall cabinet on the left. As I am eyeballing it, you should be able to cut the last cabinet in the middle and then shorten the left section to fit the space of the wall next to the door trim. It's an option that makes the area looks symmetric. Or you can install shelves over the sink. I would not recommend it because it will take the looks away. And the last option will be to remove the last cabinet, shorten it so it fits over the sink and install a single cabinet where the double one was. This will leave a triangle space behind the corner where the two cabinets will meet. You can block the space under it. Hope this helps!

Dear Mr. Dinesh, Since you are looking for securiity with aesthetics, you need to incorporate a security grill in form of a geometric lattice/ jaali. You can choose between SS/MS or corten steel to do that. Second, you need light and ventilation along with weather proofing. Hence, it would be a really good option to go for anodized aluminium doors/ WPC doors which would be cost effective and decorative as well.

Hello there, You could install a lounge sofa cum bed for sleeping and entertaining guests as well . Try placing it in a corner and try to incorporate it into a formal living with accent chairs and a center table. Second, for an informal living, a 3+2 seater config with accent chairs, floor lamps, recliners etc. would suffice. In general, split the entryway area into formal living and the existing seating area into informal living. If still having issues with organising, it is always recommended to hire a design professional. Regards, Aurum Ideas and Spaces Bhubaneswar

You can install an open shelf above the counter for your microwave, either suspended from the overhead cabinets or fixed on the wall with strong metal brackets, thereby leaving the counter itself free for use. In this picture, the homeowners have not installed their microwave yet, but you can see the shelf in the corner. The picture also shows at extreme left, a tall unit. The upper and lower sections of this unit open normally, with shutters hinged on the left. The grinder is kept in the middle section. This section has a top hung flap (door) on the side at counter top level, which enables the user to pull the grinder out for use. Of course, an electrical outlet was also provided here for this purpose