softyjain, If the windows need to be replaced I recommend looking at fixed steel to maintain the narrow profile of the windows and small window lites. Using fixed instead of operating will be a cost savings if you don't need to open them. Another option for hanging from the ceiling is a decorative light or chandelier. That way you still have light into your ceiling at night. We offer Renaissance solid bronze windows that don't require any finish or finish maintenance. Architects designers love the rose bronze color, which closely matches copper gutters. http://www.houzz.com/projects/152134/Renaissance-Solid-Bronze-Windows---Doors-by-Progressive-Solutions You may also be interested in this ideabook- http://www.houzz.com/ideabooks/18543834/thumbs/Bronze--Copper---Steel-Window-Ideas

Pankaj, I just realized that initially you told us that the bathroom area was 12'-0" x 9'-0" and later you mentioned that it was 11'-8" x 8'-0". In the last floor plan, I forgot to change the bathroom with the new dimensions. Below is the floor plan with the correct dimensions for the bathroom. The bedroom is ok, I drew it 19'-2" x 12'-6". The new layout does not change the way things are placed. Everything still fit. The only difference is that the vanity is now 4'-4" long instead of 4'-8". and the toilet is closer to the shower by 1'-0". Can you give me the lengths of the walls K and L. They are the walls between the vanity and the shower area. I will send you the new layout once you give me the length of these 2 walls.

OK... but the wire wont be lower as it is fixed now. The wire in the pics below is the wall facing each other. They were leveled on equal height but the beam on one wall makes it seem a little above. But i think you guys are absolutely right that up and down lights wont look good there. I think you are right about down lights lessismoore. Would it look good if i go with two different lights on opposite walls??? it would look odd right.

Thanks. Somehow I did not have luck finding good carpenters, Here is how I wanted the drawers to look. Here is how carpenter from my locality (not too cheap a neighborhood, called Lokhandwala) tried to make, A you can see, he tried to chisel the wood to get this design. Obviously had no clue. Finally he gave up, Brought the unfinished desk in with an excuse to show me how it is coming along, left it with me and never showed his face again. So I tried an expensive carpenter, who did some work at an apartment on NapeanSea Road, a very expensive locality and paid him what he wanted. He too did not know how to make this. All he did was out a moulding in the center to make it look .as though it were similar to what I wanted. At least his work was clean, except that he represented that the top was teakwood while I lter found out that it is mango wood, but he too did not know how to get this done. I hope one of you can suggest a carpenter with some skill.