Hi Ni, I just thought of something....did you say you planned to do the stencil motifs on the window wall? If so, I am thinking they will be mostly hidden by the curtains. I wonder if it might be better to stencil the long wall that is on the right side of the room when looking toward the window. I could see this being a pretty backdrop to the prayer box (I think that’s what you called it?) and your wood cuttings. Then maybe the opposite wall (the one with the kitchen doorway) could hold a large piece of art?

I'm not against colorful homes. There's bright, and then there's too bright. I wouldn't go with persimmon for the whole house. The photo you provided has lots of white trim which offsets the orange, but your house doesn't have that much trim (unless you were planning on adding some, which I think would look good no matter what color you ultimately choose, but even so, I wouldn't go with persimmon for the whole house, as it's still too bright). To repeat what @nwduck said, the other homes in the neighborhood don't appear to all be done in the bright colors, and so yours would stand out too too much. I like @deco's idea of the bright door, if you really love a bright color. For the rest of the house, any more subdued color would be fine, along with additional trim around the windows, and assuming that your siding color coordinates with your roofing color.

I'm a Certified installer for Trex decking. Trex Transcend is encapsulated board, with a finish that resists staining, scratches, mold and has a high definition wood grain surface. I don't know what you did to it or whoever worked on your house did something to it, but Transcend decking does not need staining or painting and the protective shell protects decking against fading. Trex Transcend and a few other Trex decking products like Trex Enhance, and Trex Select, they cannot be painted or stained. The only thing can be painted is Trex Transcend White Railings and you should only use light color paint. If you use dark colors, it will absorb heat and it will damage the surface and you can kiss your railings good bye. Also high quality fast drying primer should be used and you have to use Oil or Water based exterior paint and most importantly surface prep is the the key. When it comes to painting specialty surfaces like Trex Railings, hire a Pro to do the work. With that said, if you installed Trex yourself, you have to go to the store and have a Trex representative come out and check your deck. They will determine if loss of color fading was due because of negligence or not. If its a material defect, they will cover the material cost. If you had a Certified contractor do the work, they will cover material and labor. Call your contractor and he will get a Trex Rep to come out within a few days. Good luck

I am so happy to see you here! I will have to go back and see if i can retrieve my posts... thought I would make them into a little book for my daughter, with photos. Quick run-down on the bathroom (not travels, no time) - The kitchen has a rather elegant sliding door with beveled glass panels. Painted white, since this was the original colour. GD's new bathroom has the doors I had picked earlier; i thought of polishing them but decided sprayed automobile paint (on a resin primer) would wear better. Especially since it is such a small bathroom, and she is so splashy. I have this finish in my kitchen and it has lasted 15 years now. A tad chipped here and there, but only needs a wipe down once a week. Same finish for the balcony doors, also split like the bathroom. We have a new wardrobe, a study table with built-in shelves, and a small chest of drawers for her odds and ends. I want to re-tile the tiny balcony, more as a little statement. Currently we are looking at Portuguese tiles, though I did think a mosaic with a funky cat might be nice. Let me see the costing. The room will be painted a neutral adobe, with bright white woodwork and an off-white ceiling. This means she can go wild with cushions and covers. Other changes in the flat; We have changed the glass in the master bedroom and living room from small cramped panes to a single pane for each section with a 1" bevel all round. Doubles the cost of the glass, but looks so elegant! The air-conditioning is being re-located. The compressors were all mounted in the bedroom and living room balconies, which looked terrible and meant the balconies (very narrow, only 30" deep) couldn't be used for anything. Not even plants. So they are being moved so that the compressors can be mounted at the rear of the building. two down, one to go. Now we can put in some nice plants, fishtail palms etc. The kitchen counter on one side came out intact and will be reused elsewhere. I am planning overhead storage, cupboards, and a draining cupboard for plates and glasses. Right now there is no dish washer, though a place is earmarked, but for now I will put in a cupboard with steel racks for cups, glasses and plates, all hidden behind pressed glass doors. This is all in the planning stage.... Pictures in a little while, they are mostly on my ipad and don't transfer well to the mac. They come without numbers... so I have to rename the or something. Somebody tell me how to do this!