Option 4. I would not have more than 2 different cabinet finishes. Darker, grounded look for the base and island, with lighter, airier look for the uppers would balance the room.

I would consider putting cabinets on the short wall where the utility wall is. Have your stove there centered on the area. Move the sink so it is centered on the long wall where the cooktop is now. Put the fridge on the end run of cabinets closest to the dining table. That will give you an L shape kitchen with a nice work triangle. If you have your heart set on an island remove all the wall cabinets and install a large island. This is not the style of your kitchen but it does show the layout I described above. L shape cabinetry with stove on short end, sink in the middle with DW to right of sink with cabinet above it for dish storage and the refridgerator on the end run so it is out of work triangle and conveniet to the dining area for serving or work triangle for prep and cooking. Island can be any style you desire. L shape with island and open across from island; you might consider this layout if you desire an island. Something like this?

Thanks for both of your responses CUBSpaces team and Shweta from Shades studio. It really gives a clarity about possible consequences. I am now doubt free about changing whole things in Bathroom as it will be interconnected. However will appreciate your opinion on few things: 1. Kitchen wall tiles: I have those from countertop height to roof(almost area of 6X15 feet) which are good and not hollow. I changed countertop 5 years back without any damage to these tiles. It might cost me another 10-15 K, but I feel the whole process and quantity of wasting old good tiles makes me little sad. 2. kitchen countertop: Made new around 5 years back. I don't expect to get it all intact. But large pieces can be cut and can be used as top for other freestanding structures like dishwasher, front load washer, heighten base cabinets, etc. 3. Plywood: I don't mind giving enough labour charges for old sheets recycle. I am planning to use doors, loose sheets(like kept on bed frame of settee frame.) or parts of big frames like settee. I am keen on reducing waste than to save money. You can see various DIY ideas by western people, who remove or sand laminates and re-paint furniture, or carefully remove hollow tiles and re-attach them. Some are also re-painting ceramic tiles. I am just asking myself: Are we creating more and more waste by use and throw approach every 10-15 years, just because we can afford it?

A McSo. Couldn't the base of 15cm overhang be supported end to end with steel. As a single steel structure mounted on the larger cabinet area visible here. It should be sufficient for supporting the extension. Corbels will provide additional support but IMHO may not be required. Have you thought about an semi circular or a D shape counter to avoid sharp edges. Thanks, Nitin Cornerstone Designs, Bangalore.