Thanks Pragati, it looked to me like some sort of high polished quartz stone and if this was the case there would be a way to hide these joints by filling them with an appropriate material and polish them thereafter. So I guess, the framing-idea with the LED-Strips which pollyannagal mentioned would be a good option. You could also tape some sort of accent-tape over the joints or even just LED-Strips to hide these ugly joints. Cheers Bertram

Hi Cornerstone, I read your feedback 1. Profile handles I was late as the doors were already ready and it was too much of re-work. Regarding putting handles 2. Sharp edge can cause problem thats why the handles I have put are rounded on the edge not to hurt. 3. Where I did make a mistake was Did not put fillers. If I had put fillers on the sides the door issues could be resolved The upper cabinet handles. This is actually not my fault I had told them to put the handles in the center but they thought these are not drawers but rather cabinets so they should be put in the location where we put the vertical handles. By the time I came to check it was too late and now I am stuck. I am thinking of putting maybe 8inch handles instead of current 5inch but not sure if that would help to improve the look. Old kitchen pictures attached they also had handles but smaller

Yatin, Is it the planks or sheets of vinyl that you are contemplating? Vinyl comes in different thickness and life. Life depends on how thick the top or the 'wear layer' is. It also depends on the traffic on the floor and the quality of the floor your are layering it on.. If you select a good brand with decent thickness of the 'wear layer' you should be good for 4-5 years at one of the lowest pricing points. Thanks Nitin Cornerstone Designs, Bangalore.

There are lots of self adhesive wall papers with lot of good design n sizes u can stick them over it no need of professional help but try to get waterproof or the one u can wipe it with wet cloth some of the available on Amazon n cheap way of remodeling ur furniture look... I hope this can solve ur problem