Just a little ceramic information to share as a potter. Vitrified simply means the clay has become glass like by being fired to its proper maturing temperature. Usually ceramic tile means it is a lower temperature clay like earthenware or terra cotta. Porcelain is fired to the highest temperature and is more vitrified if you will. This usually means it is less porous to to absorb water and harder. Low fired ceramics with glazes much darker or lighter than the clay body will show chips easier. Rectified has to do with making the edges precise enough to fit smoothly together for less grout lines. So porcelain cost more to produce but it is more sturdy. All clay tiles should be vitrified.

With white fixtures, keep your floors and all tile white or a stone that is mostly white. You can paint the walls above the wainscot (which might be glossy painted wood or beadboard, or you might employ a cabinet for the sink that was painted a very soft sky blue. One narrow trim piece of tile running through the white tile might be the same tone of sky blue. Then, add blue linens / towels / etc. [houzz=] Now, consider what other colors are in your home and select one that is clear and soft and lovely with white. You might use that color instead of sky blue. I used sky blue because it is the color of water and therefore always appropriate in the bath, but you can make the bath flow with the colors you have or plan to have in your home. If this was a master bathroom instead of a common or guest bath, I would shift the choices of stone and tile from white plus white to a lovely off-white, cream, or almond tone - like travertine. Use a neutral like chocolate on the cabinet and add color only with linens and perhaps some art on the wall. [houzz=]

Unfortunately all your options require custom work: It looks like you need an 18" corner cabinet. You will have to modify the last wall cabinet on the left. As I am eyeballing it, you should be able to cut the last cabinet in the middle and then shorten the left section to fit the space of the wall next to the door trim. It's an option that makes the area looks symmetric. Or you can install shelves over the sink. I would not recommend it because it will take the looks away. And the last option will be to remove the last cabinet, shorten it so it fits over the sink and install a single cabinet where the double one was. This will leave a triangle space behind the corner where the two cabinets will meet. You can block the space under it. Hope this helps!

thank you very much to everyone who responded! I'll look into espresso and charcoal grays. As well as the steel backplash. Emmarenes, I'm living abroad in India, and the only granites in my budget are the local ones. I was advised against the gray and white local ones because i was told that they would not hold up well in the kitchen. I could have gone with a black galaxy as well but i have that granite now and despise it because of the way it hides ants and bugs so well. we live in a tropical area and there are always critters here and there. My first choice was a Brazilian white granite but it was triple the price. This granite is called Shiva pink, so it has a pink salmon and gray look to it. Im really hoping I don't hate it once it's installed. The stoneyard was a 9 hour trip up and down and i was just pressured to make a choice after several undecided trips. And I'm getting new cabinets put in. but I think I can wait for them to put the slab before staining the wood. Thanks for that idea :)