@Dar - We hired a builder and he gave us this blueprint according to our requirements. We started constructing with the foundation and then after foundation the real problem came into picture. Now i'm worried about the front elevation only. We have already decided to make the kitchen open n combine it with dining hall. As per your suggestions we can combine the stair hall which is in our hands. Let me tell you the most important thing, we are constructing each and every room according to "Vastu Shastra". So we are forced to place rooms according to that. We can't change the position of the rooms. I hope interior decoration will help us to flourish our home.

Hi, You don't say whether construction is completed and you've moved in yet or if you're going from this plan only. If so it's a good idea to live in a space for a while before knowing if your changes are really necessary. And you can change around your dining/drawing areas easily until you feel right about it. I'm not so sure if it would be a good idea to chop up the space like that, and the two furniture arrangements serve amply to define the spaces. If you are finding a real privacy inconvenience then here is a nicer solution i think. A semi transparent double sliding door like this across the study area opening would give enough privacy while at the same time allowing light to show through and not totally closing off the space :

Hi Manas, There is one option i.e. if you don't want to do any major changes you will have to take the wiring from sofa wall till TV wall and you can hide it using conduit. Or You can take a grove from one wall till the partition wall and get it filled. Partition is supposed to be a ply wall of 3 inches which will have framework in center and ply on either sides. We are attaching two reference images one with designer panel and one with plane. You can use whichever you like. We hope this will help you achieve your required design. In case of doubt, queries are most welcome. Best Regards Team Offroad

Hello there, You could use MS square sections to create an array of shutters which will conceal the entire area, look contemporary and would be helpful in ventilation too. You could continue the whole thing towards the end and carve a simple cut-out from the shutter using MS sections and only a pair of hinges attached to the wall where stairs begin. You could also achieve the same feat with CNC cut jaalis, expanded metal mesh, concrete louvers etc. There is a wide spectrum of options you could consider depending on your budget. Regards, Aurum Ideas and Spaces Bhubaneswar