Debbie, acm - Thank you very much for responding. This is a new apartment and not a remodel. I have attached the floor plan of the room & closet. In the photo below the closet is the space "DRESS" and having dimensions 5 ft 11" (X axis) x 4 ft 7" (Y axis). For representational purposes, the diagram shows an L shaped closet. Ignore that - this is a complete blank space. I am instead planning on putting the closet along the 5 ft 11" wall- but on the opposite side instead of the side shown in the diagram. So imagine my closet along a single wall, set against the wall marked with a thick dark line. acm - I did not mean a bi-fold. But rather the traditional shutter door which some may refer as a swing shutter. My dilemma is - should i use sliding doors or regular doors ? I divided my closet into 4 major compartments, each 1 ft 6" wide. So there are a total of 4 doors. Depth of closet is 2 ft. Hence walkthru space is 2 ft 6". When a closet door is open, there wld be 1 ft space between the open door & the wall. Within each of these 4 compartments, I have designed multiple external drawers upto 2 ft height from base. So the shutters/doors planned only for the portion above 2 ft. Sliding Doors - Pros - Swing space not needed. Can place a slim dresser in the corner if I want to later. Cons - Expensive as it will needlessly cover the bottom-most drawers; Sliding doors coming off rails. Regular Doors Pros - Inexpensive. Can be used to cover only the part above the drawers (need not cover drawers). This way I can open the drawers below quickly & easily. Cons - Not sure if 2 ft 6" is enough clearance space to open 18" doors. Hope this makes sense. What do you suggest?

Actually the plan ( in black background), the one with measurement is the original one drawn by an architect . The other drawing (3d n the colourfull) is just a plan i drew to have an idea , where to arrange the furniture nd some modifications using a software called MAGICPLAN. That is why the staircase and bed is of awkward sizes, my bad. About the modifications, i have removed the partition between living and dining, have made a space for handwash, storage spaces for one bedroom and in kitchen which is protruding outwards marked with slanting lines in drawing, also extended 60 cm on northern side of the house to make room for balcony for bedroom, more room for bathroom nd work area. Do u think there is less space for storage, like to fit in an godreg alamarah somewhere??

Going with professional has its own advantages. Afterall he is pro, so he has studied more and has more experience. However is this person from the kitchen shoppee, which is giving you quotation of kitchen installation? In such cases, I have experienced that they just make boxy kitchens where they add lotsa fittings, that increases your budget. Open shelves does not need such fittings, so such are omitted...Normal door wali cabinets are less and number of drawers increased. Going on own is not a bad idea, provided you need to study it well. Note down the requirements, classify work areas and so on... In this approach , you have to go bit slower and carefully. Allow some flexibility in design, so that in future , you can alter as per the need. Sometimes we come to know the problems after few months/ years and we cant change it later. Ultimately compare between [your time+ efforts+ study+ error chances] Vs Hiring professional and go ahead accordingly.

So you want to construct the kitchen along the two 7' length walls facing each other and along the 9' wall that joins them? It can be done if the space is used practically. But first please share your floor plan to show the position of the doors and windows too. Only then can once figure out how best to utilise the space