Pankaj, I just realized that initially you told us that the bathroom area was 12'-0" x 9'-0" and later you mentioned that it was 11'-8" x 8'-0". In the last floor plan, I forgot to change the bathroom with the new dimensions. Below is the floor plan with the correct dimensions for the bathroom. The bedroom is ok, I drew it 19'-2" x 12'-6". The new layout does not change the way things are placed. Everything still fit. The only difference is that the vanity is now 4'-4" long instead of 4'-8". and the toilet is closer to the shower by 1'-0". Can you give me the lengths of the walls K and L. They are the walls between the vanity and the shower area. I will send you the new layout once you give me the length of these 2 walls.

Hi pankaj. Some lovely ideas above. Is that a door at the end of the passage? It strikes me, especially if you want to make the passage all white, that you might be able to give that door a special treatment to bring some drama to the end of the passage. That draws the attention to the door and away from the passage itself. You could just paint it a vivid colour. I think we tend to let our interior doors remain very plain and boring, when there is no good reason for that to be a rule. The one below would need some sort of backing for privacy, I guess, but I think to put metalwork on a door is a great idea that you could adapt in various ways. (Be aware of the dusting, though! Outside the rain will wash things clean, but not inside.) Also have a look at http://www.lushome.com/11-door-decorating-ideas-create-modern-interior-doors/58940 for some creative paint ideas -- I can't get those pictures to copy. I like the first one on that site. It's simple and geometric, and could very easily be adapted without hurting the budget.

I currently have the same problem! I wanted that but the tiler didn't do it. I saw it after the shower was finished tiling (when I got home from work). They told me it was too difficult to cut the porcelain tile in a triangle shape and install. I did some research and I can't find a product that can hold weight, even if it is just to shave my leg! I suppose I should have had a triangle corner with a base (that wasn't floating) but I think it is too late. Hopefully someone can tell both of us a better answer. Just realize this was posted July 2014....... where you able to solve the problem??????

I am so happy to see you here! I will have to go back and see if i can retrieve my posts... thought I would make them into a little book for my daughter, with photos. Quick run-down on the bathroom (not travels, no time) - The kitchen has a rather elegant sliding door with beveled glass panels. Painted white, since this was the original colour. GD's new bathroom has the doors I had picked earlier; i thought of polishing them but decided sprayed automobile paint (on a resin primer) would wear better. Especially since it is such a small bathroom, and she is so splashy. I have this finish in my kitchen and it has lasted 15 years now. A tad chipped here and there, but only needs a wipe down once a week. Same finish for the balcony doors, also split like the bathroom. We have a new wardrobe, a study table with built-in shelves, and a small chest of drawers for her odds and ends. I want to re-tile the tiny balcony, more as a little statement. Currently we are looking at Portuguese tiles, though I did think a mosaic with a funky cat might be nice. Let me see the costing. The room will be painted a neutral adobe, with bright white woodwork and an off-white ceiling. This means she can go wild with cushions and covers. Other changes in the flat; We have changed the glass in the master bedroom and living room from small cramped panes to a single pane for each section with a 1" bevel all round. Doubles the cost of the glass, but looks so elegant! The air-conditioning is being re-located. The compressors were all mounted in the bedroom and living room balconies, which looked terrible and meant the balconies (very narrow, only 30" deep) couldn't be used for anything. Not even plants. So they are being moved so that the compressors can be mounted at the rear of the building. two down, one to go. Now we can put in some nice plants, fishtail palms etc. The kitchen counter on one side came out intact and will be reused elsewhere. I am planning overhead storage, cupboards, and a draining cupboard for plates and glasses. Right now there is no dish washer, though a place is earmarked, but for now I will put in a cupboard with steel racks for cups, glasses and plates, all hidden behind pressed glass doors. This is all in the planning stage.... Pictures in a little while, they are mostly on my ipad and don't transfer well to the mac. They come without numbers... so I have to rename the or something. Somebody tell me how to do this!