Pankaj, I just realized that initially you told us that the bathroom area was 12'-0" x 9'-0" and later you mentioned that it was 11'-8" x 8'-0". In the last floor plan, I forgot to change the bathroom with the new dimensions. Below is the floor plan with the correct dimensions for the bathroom. The bedroom is ok, I drew it 19'-2" x 12'-6". The new layout does not change the way things are placed. Everything still fit. The only difference is that the vanity is now 4'-4" long instead of 4'-8". and the toilet is closer to the shower by 1'-0". Can you give me the lengths of the walls K and L. They are the walls between the vanity and the shower area. I will send you the new layout once you give me the length of these 2 walls.

I suggest you follow the step-by-step guide for creating storage cabinets under the bathroom sink. Take proper measurements - Measure the available available space in height, width and height. Cut Plywood to size - With a circular saw and framing square, cut all the required pieces out. You can use a sliding compound saw as an alternative. Attach the base and sides - Start assembling the sink cabinets by placing the bottom piece of plywood sheet on a flat surface. Attach the back and top boards - Place the plywood sheet for the top part of the cabinet and attach wood screws to connect it to both the sides. Turn the back faces of the cabinet upwards. Keep the back piece over the structure and fix it into place with wood screws. Attach shelves - Place the cabinet in an upright position to install the shelves. Slide a shelf into the structure so it is flush against the back. Attach door - Keep both hinges of the door on the same side of the plywood sheet. Drill them using wood screws into place. Now keep the door over the cabinet structure, extend the hinges to one of the side panels and fix them to make them secure. Fix a hasp closure on the other side of the door, placing it in the center of the hinges.

Keya, glad you decided to take the one reader's idea about moving the armoires in front of windows that you don't need and giving the bed a wall of its own! And, yes, you can have Roman shades on one wall and layered drapes on the other. When I had drapes made for my tall sitting room windows/doors, I had them use the same fabric for the Roman shades for the smaller windows on the other wall. For me personally, in these older Indian homes with all the odd nooks and niches in the walls, perhaps it would be more soothing to have a light/med tone paint on the walls that blends with the drapes/blinds for an 'uninterrupted' look, and I would use the same color on ceiling and beams. (but that is just my thought) I would start the process with a large carpet with your favorite colors, then choose your Bedcover & cushions, then your wall paint and fabric for drapes/blinds ..Not certain what style you like, but if you really like a particular Ethnic bedcover fabric, you can always have them stitched into curtains or Roman shades too. Can't wait to see the "After" pics!

that is what i have added if you can see the pic above.. want some suggestions on partition that i can use between dining and sitting