OK... but the wire wont be lower as it is fixed now. The wire in the pics below is the wall facing each other. They were leveled on equal height but the beam on one wall makes it seem a little above. But i think you guys are absolutely right that up and down lights wont look good there. I think you are right about down lights lessismoore. Would it look good if i go with two different lights on opposite walls??? it would look odd right.

Hello Namrata. Even if you do not intend to get the false ceiling done, you can still get the desired lighting in your home. You could do so by having rafters (made of ply and veneer/laminate combination) attached to the ceiling and run the electrical wires through it. Design the rafters in a specific pattern so that it gives a fresh look to your space and also serves your purpose of having the ceiling lights/pendant lights/chandeliers installed.

The living room window itself does not appear to be designed to let much light through. Please show a photo of that window, also of what lies outside the window. In the meantime, I suggest that you replace the builder-installed window with one of your own choosing. Use toughened glass rather than this heavy grill. Minimise the frame, if possible, particularly if there will not be much air coming through. If there is the potential of air but not much view, then have a sliding or bifold window that maximises the opening. On the blank wall outside, if that's your view, put up a green wall, creeper, something to improve the outlook. For nighttime viewing, add mild uplights in a natural white shade, focused on the greenery. Or else, you may be able to put up a reflective surface on the facing wall, to bounce in more of whatever light there is. Such as a coloured glass mural if not a plain mirror. Once you have maximised your window, move on to the wall to the right of your living room photo. That is, the wall that your living room shares with the west bedroom. Use a very large mirror on that wall to expand your living room visually and to bounce more light around. To cut down on expense/effort you can make it out of several standard-size sheets rather than one giant sheet. However, if that wall is to be covered with storage, make sure the front surface of the cabinetry is fairly light-coloured and reflective. Last, if not yet satisfied, consult a lighting expert for this room. That would be useful. These are fairly expensive solutions, all in all, but they should help.

Suraj, If you have access to the room that you shared earlier you can try seeing the flicker effect at night time with both lights and fan being on. If the lamp has a 360 degree light spread it will cast the fans shadow on the ceiling and when the fan is turned on it causes a flikr effect. I personally find it a distraction and at the same time many would not even notice it. Take the pick based on your usage. Wall mounted fans and recessed fans can also be explored. Thanks, Nitin Cornerstone Designs, Bangalore.