I suggest you follow the step-by-step guide for creating storage cabinets under the bathroom sink. Take proper measurements - Measure the available available space in height, width and height. Cut Plywood to size - With a circular saw and framing square, cut all the required pieces out. You can use a sliding compound saw as an alternative. Attach the base and sides - Start assembling the sink cabinets by placing the bottom piece of plywood sheet on a flat surface. Attach the back and top boards - Place the plywood sheet for the top part of the cabinet and attach wood screws to connect it to both the sides. Turn the back faces of the cabinet upwards. Keep the back piece over the structure and fix it into place with wood screws. Attach shelves - Place the cabinet in an upright position to install the shelves. Slide a shelf into the structure so it is flush against the back. Attach door - Keep both hinges of the door on the same side of the plywood sheet. Drill them using wood screws into place. Now keep the door over the cabinet structure, extend the hinges to one of the side panels and fix them to make them secure. Fix a hasp closure on the other side of the door, placing it in the center of the hinges.

the design looks great . According to me one side of windows can be used as bed wall . we can have blackout curtains or blackout window blinds . You can even play with drapery to define the area behind bed. We already have seating in the room so next we can do is give a console/ study table with an puffe / chair to it. also one can add a bench at the end of bed. Size you can check on your Autocad . Bed wall should be the focus when one enters the room, so I feel the bed should be placed like this . Dimensions of furniture and circulation space you can work on. Also WC should be on the washbasin side to avoid Future leakages and dampness in bedroom wall. all the best

@Rock Doc: Are you addressing this to me? I haven't actually bought these tiles yet - when I do, I will definitely be going for the handmade ones. They're a work of art and irreplaceable in my opinion. However, there are also screen-printed tiles available in the market in more or less the same patterns; the workmanship is of course different, but you get them cheaper, and they're also more easily available. You could give that a shot. I'd recommend Aakaar Flooring Solutions - they're here on Houzz and are able to provide both the above-mentioned types.

Many thanks for your valuable comments. 1. My intention of raised cabinets was to clean it daily, as cabinets that touch floor accumulate lot of dust and food particles below. If we rule out steel legs, any inputs on raised floor only of cabinet area and then cabinets?(Just like plinth in modular cabinets- but this will be permanent and of tiles) I have not seen such structure anywhere, so curious if it will work. Otherwise I will go with traditional ones. 2. Moving pooja out of kitchen is very difficult as other rooms are just enough for their function. Currently a small Mandir is attached on wall where Fridge is shown in layout. I thought the new area could be little extra for all pooja related things. Will like to know the reason of your recommendation, is it odd in whole design, or not suitable in area .. or anything else? How about moving it to corner of dining area?