Hi, I am from Assam, Guwahati. Yes it is warm humid place with lot of rains (like kerala). The bookcase is gradually drying. Fortunately last few days were very sunny and airy and my room has two big windows. Few mor details of my bookcase. It is 8 feet wide, 6 feet tall and 11 inch deep. It was attached with wall with 6 wall screw and has four pair of legs.I ask the carpenter to divide the bookcase into 3 part (32 inch each) and two door system for each part. Every part has 6 shelve from top to botom. There is no plywood or wood in back. I made it that way because the bookcase is attached in my room's inner wall I understand that the bookcase may have very little gap in between wall and wooden planks and i am ready for it. But I have no idea that beacuse of faulty mesurement, it became 1 inch gap between wall and sheve in the upper side. In lower side it is very minimum gap. I stop the carpenters to put the glass door. But now I see that they also make fault in making the doors. The doors are heavier that the shelf. The wooden planks are 1 inch thick while the door are 1.1/2 inch thick. I actually visit few hardwere shops here, but most have no ideas what to do and few says to apply wall putty to fill the gap. But my back wall is coloured (old wall, that why) and wall putty will not set on old wall and timber. I cannot remove it now from the wall otherwise the wall may destroyed. I really need a step by step guide now that what to do after the heves are dry, how to fil the gap and how to put the door without further damaging the shelf.

Construction and maintenance details

But if you simply cannot remove the washbasin, replace this configuration with a decorative countertop version - a nice stone counter and earthenware basin as shown in the pictures. A more econimical, but not so pretty option is to leave everything as it is and add a low partition about 3'6" high on the left that shields the washbasin from view. You can continue the tiling (ideally a faux brick or slate- NOT white) across the niche on all three walls. Paint the door in a dark shade too -like charcoal grey so that it does not look bathroom-y. Add a wooden moulding around the door frame and paint

Thank you cornerstone design studio. Can you please tell me the exact process of doing this and what precautions need to take care for environment actions.