standard bathtubs take up space, look outdated and in today's busy life, rarely do we get time to use them. Better go for a high end steam shower with a bench seating if its within your budget. However, a free bathtub in a large bathroom however can be staggering. From my experience and the skill set available in our country better not attempt self made, it is quite demanding.

Hi Cornerstone, I read your feedback 1. Profile handles I was late as the doors were already ready and it was too much of re-work. Regarding putting handles 2. Sharp edge can cause problem thats why the handles I have put are rounded on the edge not to hurt. 3. Where I did make a mistake was Did not put fillers. If I had put fillers on the sides the door issues could be resolved The upper cabinet handles. This is actually not my fault I had told them to put the handles in the center but they thought these are not drawers but rather cabinets so they should be put in the location where we put the vertical handles. By the time I came to check it was too late and now I am stuck. I am thinking of putting maybe 8inch handles instead of current 5inch but not sure if that would help to improve the look. Old kitchen pictures attached they also had handles but smaller

Thanks for both of your responses CUBSpaces team and Shweta from Shades studio. It really gives a clarity about possible consequences. I am now doubt free about changing whole things in Bathroom as it will be interconnected. However will appreciate your opinion on few things: 1. Kitchen wall tiles: I have those from countertop height to roof(almost area of 6X15 feet) which are good and not hollow. I changed countertop 5 years back without any damage to these tiles. It might cost me another 10-15 K, but I feel the whole process and quantity of wasting old good tiles makes me little sad. 2. kitchen countertop: Made new around 5 years back. I don't expect to get it all intact. But large pieces can be cut and can be used as top for other freestanding structures like dishwasher, front load washer, heighten base cabinets, etc. 3. Plywood: I don't mind giving enough labour charges for old sheets recycle. I am planning to use doors, loose sheets(like kept on bed frame of settee frame.) or parts of big frames like settee. I am keen on reducing waste than to save money. You can see various DIY ideas by western people, who remove or sand laminates and re-paint furniture, or carefully remove hollow tiles and re-attach them. Some are also re-painting ceramic tiles. I am just asking myself: Are we creating more and more waste by use and throw approach every 10-15 years, just because we can afford it?

I live in a converted Victorian school. The impact noise from the flat floor above is terrible. It's actually a relatively new floor (upstairs) but the owner of it is a nightmare and the company who fitted it are complete crooks. The result is a constant creaking/cracking (up to 70db!!) every time someone just walks in the flat upstairs. He is refusing to do any repairs whatsoever - despite having been to court over the issue. He rammed boards between the joists and used cheapest chipboard for floor. Result = creaking, popping, cracking. The noise is very much coming from the existing structure of the floor upstairs, via flanking. Needless to say the freehold are absolutely useless also. I've attached a floorplan of my flat - in the non-bedroom part there are high ceilings and I think I can easily manage to install a false ceiling there (I have at least 10cm to play with there). However, where the bedrooms are the ceilings are very low and I only really have 5cm to play with. On top of that there are 2 RSJ's running across the bedroom areas - that are boxed in and will therefore cause a break in any materials. It's a nightmare! I am desperate to find something that will help in the bedroom area. However, I am unsure of what to go for having read around? ....atm the ceiling is made up of 2xlayers of plasterboard screwed into the joists directly. Can anyone recommend anything on top of this? That would be effective for such loud creaking/cracking. I am only interested in reducing impact noise from above (as I know the airborne will naturally be reduced if I can sort this). Does green glue actually work if I put 2 more layers of plasterboard?? Does acoustic plasterboard actually work? What about MLV on a ceiling? Or should I be looking at soundproofing wallpaper foam and then a layer of plaster? What's the slimmest best solution? Perhaps resilient bars are an option straight onto the ceiling as is - and then one more layer of something? Do you have any experience of this? Grateful for any thoughts - or for anyone's experience where a particular material hasn't worked. Many thanks, A