Pankaj, I just realized that initially you told us that the bathroom area was 12'-0" x 9'-0" and later you mentioned that it was 11'-8" x 8'-0". In the last floor plan, I forgot to change the bathroom with the new dimensions. Below is the floor plan with the correct dimensions for the bathroom. The bedroom is ok, I drew it 19'-2" x 12'-6". The new layout does not change the way things are placed. Everything still fit. The only difference is that the vanity is now 4'-4" long instead of 4'-8". and the toilet is closer to the shower by 1'-0". Can you give me the lengths of the walls K and L. They are the walls between the vanity and the shower area. I will send you the new layout once you give me the length of these 2 walls.

Sorry but I don't understand your pictures. You are talking about 2 bathrooms but we see only one floor plan. Is the 1.52M x 2.24M the 5 x 8 bathroom in your dilemma title. If so, can we see the floor plan of the 5 x 9 bathroom? Is the space with a small rectangle in the middle the extra 5.5 x 4.9 ft space you mentioned in your dilemma? Also 1.52M x 2.24M is in reality 5'0" x 7'4". This is 8 in. less. It can make a big difference on how to place fixtures in a bathroom.

Hire a local designer who can actually see your space and where the plumbing connects are located. Generic layouts will never help with your specific space.

Hi Cornerstone, I read your feedback 1. Profile handles I was late as the doors were already ready and it was too much of re-work. Regarding putting handles 2. Sharp edge can cause problem thats why the handles I have put are rounded on the edge not to hurt. 3. Where I did make a mistake was Did not put fillers. If I had put fillers on the sides the door issues could be resolved The upper cabinet handles. This is actually not my fault I had told them to put the handles in the center but they thought these are not drawers but rather cabinets so they should be put in the location where we put the vertical handles. By the time I came to check it was too late and now I am stuck. I am thinking of putting maybe 8inch handles instead of current 5inch but not sure if that would help to improve the look. Old kitchen pictures attached they also had handles but smaller