Most regions have their own prevailing construction methods and materials that are common and customary to that region. It may be driven by the available raw materials, local labor and their experience with a certain type of construction, and the cost of labor to build. Other factors that drive the different type of construction can be pressures from the environment and climate conditions. One can create recesses in masonry or stone walls but there may be structural weaknesses that become a factor or just more complicated construction that becomes involved. Building recesses in heavy masonry walls verses light stick framed walls can be equally possible. Reducing the thickness of a wall can also affect the insulation capabilities of that wall as well as the structure.

Unfortunately all your options require custom work: It looks like you need an 18" corner cabinet. You will have to modify the last wall cabinet on the left. As I am eyeballing it, you should be able to cut the last cabinet in the middle and then shorten the left section to fit the space of the wall next to the door trim. It's an option that makes the area looks symmetric. Or you can install shelves over the sink. I would not recommend it because it will take the looks away. And the last option will be to remove the last cabinet, shorten it so it fits over the sink and install a single cabinet where the double one was. This will leave a triangle space behind the corner where the two cabinets will meet. You can block the space under it. Hope this helps!

Hi, I am from Assam, Guwahati. Yes it is warm humid place with lot of rains (like kerala). The bookcase is gradually drying. Fortunately last few days were very sunny and airy and my room has two big windows. Few mor details of my bookcase. It is 8 feet wide, 6 feet tall and 11 inch deep. It was attached with wall with 6 wall screw and has four pair of legs.I ask the carpenter to divide the bookcase into 3 part (32 inch each) and two door system for each part. Every part has 6 shelve from top to botom. There is no plywood or wood in back. I made it that way because the bookcase is attached in my room's inner wall I understand that the bookcase may have very little gap in between wall and wooden planks and i am ready for it. But I have no idea that beacuse of faulty mesurement, it became 1 inch gap between wall and sheve in the upper side. In lower side it is very minimum gap. I stop the carpenters to put the glass door. But now I see that they also make fault in making the doors. The doors are heavier that the shelf. The wooden planks are 1 inch thick while the door are 1.1/2 inch thick. I actually visit few hardwere shops here, but most have no ideas what to do and few says to apply wall putty to fill the gap. But my back wall is coloured (old wall, that why) and wall putty will not set on old wall and timber. I cannot remove it now from the wall otherwise the wall may destroyed. I really need a step by step guide now that what to do after the heves are dry, how to fil the gap and how to put the door without further damaging the shelf.

Going with professional has its own advantages. Afterall he is pro, so he has studied more and has more experience. However is this person from the kitchen shoppee, which is giving you quotation of kitchen installation? In such cases, I have experienced that they just make boxy kitchens where they add lotsa fittings, that increases your budget. Open shelves does not need such fittings, so such are omitted...Normal door wali cabinets are less and number of drawers increased. Going on own is not a bad idea, provided you need to study it well. Note down the requirements, classify work areas and so on... In this approach , you have to go bit slower and carefully. Allow some flexibility in design, so that in future , you can alter as per the need. Sometimes we come to know the problems after few months/ years and we cant change it later. Ultimately compare between [your time+ efforts+ study+ error chances] Vs Hiring professional and go ahead accordingly.