If you can access your home, take some colour samples in shades you like with you and check the light and aspect of each room, that can change colours, some rooms may be a little dull and need bright or cheering colours others may be hot and need cooling colours. It is very important you consider this before you start. Then choose ideas and colours you like and that suit your room, and then go shopping to see what is on the market and available. It is no use getting your mind set on a colour for example and then finding you can't get a fabric in that shade. Flooring will most likely be common to all rooms so you have to ensure the flooring you choose will work with all your planned colour schemes in each room. Check out all your options and things will then start to come together for you. When shopping pick up as many swatches and samples as you can, even take photos of ideas if you are able, it will all help. Most important thing is to take it slowly. Don't try to have it all done at once. Aim to choose your floor coverings, then have all your rooms painted, and floor coverings laid before you move in. Furniture and furnishings can be added at any time afterwards.

When I lived in the Middle East we had marble floors. The advantages were they kept very cool. They were really nice looking. Large slabs of marble, not marble tiles. Sleek and modern. We only had one swamp cooler so it was important that heat not be trapped in the house. We had very deep eaves to block the sun, and white marble inside and outside to reflect the sun back. The disadvantage is they stain more easily than granite or tile. But this was not a problem, really, as they were cleaned frequently. Also, they are very hard. We had rugs in the seating areas but still, marble floors hurt if you fall on them. But then that is the same with any stone, tile, or even hardwoods. Good luck!

I am assuming you haven't finalised your wall colours and colours of any other fixed elements. In case you have finalised your color scheme you would need to see which of these colours blend well or complement with that scheme. Assuming none of this info is available, then you could look at the neutrals which go with all colours. The white tile and the 2 colours at the end would be preferable. If you want color on the floor as well as drama, you can choose from the 2nd options from both sides or even the 1st from left.

Ground VAV Fan Powered Terminal Feature Description: 1) FH-VAV-GFP ground series fans terminal is a set of removable underfloor air supply device. The outlet and secondary air return consist of two grills with inclination. 2) The first air is supplied via underfloor air supply system, pressure independent control. The fan runs in fixed air volume to induced some inner secondary airflow. 3) Using High precision flow sensor with FH-001 patent, it can increase the flow gain coefficient 1.2~1.5 times and accurately measure the air speed of 1m/s or above. 4) Using centrifugal machine with low noise, it can realise 3 speed adjustments. 5) 500W and 1000W type heaters are available for options. 6) With DDC controller, it can be connected with BA system via standard LON-works, BAC-net or other communication protocols. 7) There are scale, LED and digital display panels for user's options. 8) Basic Technical Assurance: A) The air speed for where 0.3m from the air outlet is not exceeding 0.5m/s. B) The inner temperature gradient is not exceeding 1C/m. C) The inner noise level is not exceeding dB(A)40. D) Ensure to meet new air requirement through setting the minimal air volume. Controlling Scheme Description: 1) Ground series fan powered terminal is connected with the central air handling unit (AHU). We suggest to interlock the terminal with AHU directly through an air flow switch. And the switch can detect the pressure of the first air inlet. 2) When the inner temperature goes higher, the controller will release the signal to increase the first air volume. When the first air increases, the secondary air will decrease accordingly. and the fan will run in fixed air volume. When inner temperature exceeds the set point, the first air will keep at the max volume. 3) When inner temperature drops, the controller will control to decrease the first air volume. 4) When the inner temperature reaches the set point and first air reaches its minimum, the fan will begin for the secondary air supply. 5) When it decreases constantly in inner temperature, it can start the heating coil in grading.