This is a dilemma indeed! Posts in the middle of rooms are always a little difficult. It would be helpful to have pictures of all four walls to suggest the best layout. From what I can understand of your dilemma, I've attached a layout that may work based on your description. It features a defined entry. So when you walk through the front door, you will see a console table with a couple of ottomans stashed beneath. They can come in handy for extra seating. In front of the console are two arm chairs, followed by a modular sectional - they make up your main seating area. To the right of the kitchen door is a TV console. Behind the sofa is a bookcase and to the right is a round table with a couple of chairs for games, paper work or what have you. You don't mention any windows. Is this the case? If so, we'll want to make sure you've got adequate lighting and colors that will work with the limited light. Hope this helps!

OK... but the wire wont be lower as it is fixed now. The wire in the pics below is the wall facing each other. They were leveled on equal height but the beam on one wall makes it seem a little above. But i think you guys are absolutely right that up and down lights wont look good there. I think you are right about down lights lessismoore. Would it look good if i go with two different lights on opposite walls??? it would look odd right.

Hello there, If you don't want to consider wood as a countertop, there are several other options available : 1. Wrought iron jaali 2. Corian solid surfaces (susceptible to heat) 3.Marble/granite/quartz 4. Semi-precious stone slabs 5. PU paint 6. Sandstone 7. Concrete with oxide paints(IPS) 8. Glass mosaic etc.. Note : wood is timeless and lends a warmth like no other. It will end up in one form or other in every house Regards, Aurum Ideas and Spaces Bhubaneswar

Zet Lee, It is a typical example of proportions going wrong. We often pick up an image and replicate it with personal tweaks but thanks to limited foresight of workers we end up landing elsewhere. Anyways, curtains ideally should have a very small role to decide the furniture finishes. Furniture is permanent upholstery changes every couple of years. IMHO, upholstery should compliment the furniture and not the other way round. If the laminates are already procured then can you accommodate any changes suggested? Let us know. There are a few issues visible. The bed does not have a central support and please also make sure you have a plan for electric board on the left side of the bed shouldn't land up on the back cushions. Thanks, Nitin Cornerstone Designs, Bangalore.