Help! What can I do about a bathroom toilet under the window?
ergchebbi
6 years ago
Featured Answer
Sort by:Oldest
Comments (31)
Related Discussions
Need help to design my master bathroom
Comments (5)I currently have the same problem! I wanted that but the tiler didn't do it. I saw it after the shower was finished tiling (when I got home from work). They told me it was too difficult to cut the porcelain tile in a triangle shape and install. I did some research and I can't find a product that can hold weight, even if it is just to shave my leg! I suppose I should have had a triangle corner with a base (that wasn't floating) but I think it is too late. Hopefully someone can tell both of us a better answer. Just realize this was posted July 2014....... where you able to solve the problem??????...See MoreHelp needed to design the kitchen and bathroom
Comments (18)I agree with divadeva. More lights. If you can add pot lights do it. If they're already there add task lighting and up the wattage on the bulbs on the pot lights (replace with LED and you can make them brighter because the wattage on LED is lower for brighter light). If you have all of that add decorative lighting. If ventilation is an issue find a way to move the air around or add air filtration. Maybe the HVAC is deficient. Maybe you can add a HEPA filter instead of the standard one that comes with the unit. Call an HVAC specialist to see if there is a way to boost air flow in the room....See MoreNeed help with my bathroom and adjoining dress space.
Comments (9)Thanks a lot for your comment. I wouldn't exactly call it a walk in-closet. As you can see from the drawing, Its space provided for two single wardrobe (one on each side). Maximum width can be around 3.5 ft. The humidity point is quite relevant. The question is would it be possible to include a wet room in the space i.e. 6ft x 8.6ft. - considering I don't remove the dress wall. Wanted to get a sense on the possible layout. Thanks and look forward to your advise....See MorePlease help - Bathroom under-Sink cabinet
Comments (11)I suggest you follow the step-by-step guide for creating storage cabinets under the bathroom sink. Take proper measurements - Measure the available available space in height, width and height. Cut Plywood to size - With a circular saw and framing square, cut all the required pieces out. You can use a sliding compound saw as an alternative. Attach the base and sides - Start assembling the sink cabinets by placing the bottom piece of plywood sheet on a flat surface. Attach the back and top boards - Place the plywood sheet for the top part of the cabinet and attach wood screws to connect it to both the sides. Turn the back faces of the cabinet upwards. Keep the back piece over the structure and fix it into place with wood screws. Attach shelves - Place the cabinet in an upright position to install the shelves. Slide a shelf into the structure so it is flush against the back. Attach door - Keep both hinges of the door on the same side of the plywood sheet. Drill them using wood screws into place. Now keep the door over the cabinet structure, extend the hinges to one of the side panels and fix them to make them secure. Fix a hasp closure on the other side of the door, placing it in the center of the hinges....See Moreergchebbi
6 years agoergchebbi
6 years agoergchebbi
6 years ago
grapefruit1_ar