Hi, Tile trims come in aluminium, stainless steel and PVC. 1] You can use PVC trims if you don't want to use metal trims. They are water resistant and durable. PVC trims come in a variety of colours so you can also choose the colour that goes with the rest of your tiles and bathroom. 2] A stainless steel trim is extremely durable and is highly resistant to corrosion and abrasions. Due to this it is widely used in factories. 3] Aluminium trims come in a variety of finishes. Anodized aluminium trims come essentially in metallic colours like silver, bronze, copper, gold. Powder coated aluminium trims come in a variety of colours and don't give the metallic look but offer adequate resistance to water damage. Thus, you can either go for PVC or powder coated aluminium trims if you are not fond of the metallic look. All the best! Regards, RnD Atelier Nagpur

I have been struggling as a homeowner who is off on medical leave with watching a 3 day install by one of the 2 big box retailers on 2 59 x 24 vinyl Pella casement windows. I found the 50 foot roll of Pella Smart Flash in the garage after installation then realized they used the cheap red house wrap tape to seal the nailing fins then put the 4 inch cedar trim in and not have the proper caulk (so the cedar is not caulked 5 days after start of install and we have had thunderstorms every day but one it will rain 3 more days). I called em on it and got red tape is fine, then me demanding otherwise to "it was temporary we where going to rip all the 4 inch cedar trim boards we placed around the windows off". Mind you they cut back 12 inch Skirl cedar siding to get at the fins but then why where they going to caulk it if it was temporary. So they put the windows in and nailed em over the OSB not replacing the 4 inches of barrier when they cut thru the felt then placed the red tape over the fins and OSB). I think they should have set the saw shallower not to cut the felt? Do I need them to pull the windows out to put splice in some type of 4" barrier as I told them they should? They agreed pull the 4 inch trim off anyway to replace the "temporary" tape. Should I ask for new cedar trim boards as they will take em off with nail holes and possibly break? What about the rain getting under/in the uncaulked cedar trim(the cuts are tight thank goodness) its going to rain all week is it ok the uncaulked trim boards are getting steady rain for a almost a solid week? They showed up asking if they can use my ladder ok no longer, they did not have caulk asking me if I was going to caulk the second story windows(I am on crutches), having to reorder interior oak they did not have enough, did not have a vacuumn asked to use mine, and here i sit with windows as the rain pours down the west side of my house and windows not caulked waiting for my hip to heal. Thanks for the help! Just really disappointed in the whole job and one window does not even close easy at all I have to jack around with the crank, he said the trim was too tight he will cut it back.

Anyone have any luck updating shower trim without replacing the valve? We have the original 1977 set that came with the house and want To change the look from the ugly old standard builder trim of last century. Moentrol escutcheon plate has screws at 5/7 o’clock. This is proving to be quite a challenge without spending an arm and a leg!

Greetings From Dream Design, As per your Requirements we are suggestion you some changes -White color -where It is Grey -Dark Cream -Where Blue as it will highlight that area and also well goes with Bricks -and Trims take Dark cream -For Shutters you can also use Cream color So use the White and dark cream with combination as brick part is already dark If you need more help Pls mail us. Thanks Dream Design