OK... but the wire wont be lower as it is fixed now. The wire in the pics below is the wall facing each other. They were leveled on equal height but the beam on one wall makes it seem a little above. But i think you guys are absolutely right that up and down lights wont look good there. I think you are right about down lights lessismoore. Would it look good if i go with two different lights on opposite walls??? it would look odd right.

Unfortunately all your options require custom work: It looks like you need an 18" corner cabinet. You will have to modify the last wall cabinet on the left. As I am eyeballing it, you should be able to cut the last cabinet in the middle and then shorten the left section to fit the space of the wall next to the door trim. It's an option that makes the area looks symmetric. Or you can install shelves over the sink. I would not recommend it because it will take the looks away. And the last option will be to remove the last cabinet, shorten it so it fits over the sink and install a single cabinet where the double one was. This will leave a triangle space behind the corner where the two cabinets will meet. You can block the space under it. Hope this helps!

that is what i have added if you can see the pic above.. want some suggestions on partition that i can use between dining and sitting

Hello there, When you have considered granites as window frames, it will definitely outperform than any other material as it is a natural stone. Second, the borders and frames need to be put up very carefully with a skilled stone worker only and please ensure the appropriate mortar mix before fixing. Third, mirror polish is needed for the frames as they look incredible when using with uPVC profiles. Fouth, pre-drill holes for hinges and security grills. Hope your project turns out good. Regards, Aurum Ideas and Spaces Bhubaneswar