Kriti, I don't have any pics to attach but I can give you simple instructions. If your headboard is removable you can skip the step of creating the paper template. 1. Remove the headboard. 2. Lay your fabric flat on a surface large enough to lay your headboard on top (I often need to use the floor). Also, if you can find a flat sheet you like, there's alot of fabric there. probably cheaper. 3. Using a marker, trace the headboard onto the fabric. You will need 2 layers of this fabric, or one for the front, and a plain or contrasting fabric for the back. 4. Cut the fabric with a 1" seam allowance. 5. With right sides together, sew the two pieces of fabric together. Turn slipcover right sides out. 6. Glue padding to the headboard. 7. Pull your slipcover over the headboard and padding. Reattach the headboard to the bed. 8. Done! If you like to change your headboard with the seasons, you can inexpensively create many slipcovers this way. I hope this helps, and I hope it makes sense as I am writing this at 3 o'clock in the morning! Good luck!

With your original pictures - I agree with larger rug. But I don't agree with comments suggesting the rooms are monochromatic. They are lively indeed. I think you are just missing some accessories! Art work on the empty walls - even just a single large dramatic piece is in order. In the bedroom on the white wall, in the living space behind the sofa, in the greenish bedroom behind the two beds. Those are instant areas where you can improve. But I think your spaces are lovely and well put together. Also I agree with the comment about table lamps - some of those would really add something, and your coffee table looks so empty - maybe just one gorgeous bowl, or stack some books. These rooms are 90% done in my opinions, just need a few finishing touches. Some of my rooms come out like this because the clients are not willing to pay for those last few finish items or feel they can do that part themselves...

I suggest you follow the step-by-step guide for creating storage cabinets under the bathroom sink. Take proper measurements - Measure the available available space in height, width and height. Cut Plywood to size - With a circular saw and framing square, cut all the required pieces out. You can use a sliding compound saw as an alternative. Attach the base and sides - Start assembling the sink cabinets by placing the bottom piece of plywood sheet on a flat surface. Attach the back and top boards - Place the plywood sheet for the top part of the cabinet and attach wood screws to connect it to both the sides. Turn the back faces of the cabinet upwards. Keep the back piece over the structure and fix it into place with wood screws. Attach shelves - Place the cabinet in an upright position to install the shelves. Slide a shelf into the structure so it is flush against the back. Attach door - Keep both hinges of the door on the same side of the plywood sheet. Drill them using wood screws into place. Now keep the door over the cabinet structure, extend the hinges to one of the side panels and fix them to make them secure. Fix a hasp closure on the other side of the door, placing it in the center of the hinges.

Mr.Jaidev, first of all your plan is not at all made to the scale. How can your drawing room accommodate five 3 seat sofa when one 3 seat sofa require 6'6" x 2'6" of space and the layout dimensions are 11' x 14'. Your dining area is 8' x 10' and the plan shows 8 seat dining table which requires 8' x 8' of table and chair space that too excluding the movement space. This plan cannot be implemented following this furniture layout with such impractical divisions and without standard sizes. You must re plan the whole plot. Its always better to start late but with proper planning.