the back wall panels look like ikea besta doors. the hanging cabinet could also be besta boxes, but with customized doors. the console in front of it, you could get a similar look by using a malm console table and cutting it to height. from there you'd want to use a couple of besta cabinets to create the closed off storage. the low bench could be made with plywood and then stained or painted to match the finish of the malm/besta combo you choose. besta cabinets :: http://www.ikea.com/us/en/catalog/categories/departments/living_room/11794/ malm console table :: http://www.ikea.com/us/en/catalog/products/80196480/

I think this piece is quite lovely. It appears that your couch and chairs have dark wood so I would be tempted to stain or paint the buffet to match these items. Changing the large modern handles to smaller antique ones might help to make it less bulky looking and tie in with the other items in your room.. I like the idea of putting a mirror in the upper door, however much as I like the criss cross effect in the sample pictures, adding more detail may conflict with the curves in your sofa and chairs. You could look for a decorative detail that has more subtle style. As for placement, it might go on the short wall where you have a bench or even on the wall where you have your table with two chairs, one on each side to balance the look.

A soft, warm grey shade would look lovely, and can be as dark or light as you want. A warmer shade will work with the brown stained wood floor, and the grey will complement the black granite. You could have an undertone of green, blue or tan if you didn't want a pure grey. And it would look nice with any silver metal hardware, either polished or satin/brushed, so you could choose pewter, chrome or nickel. It would still work with white trim too.

I suggest you follow the step-by-step guide for creating storage cabinets under the bathroom sink. Take proper measurements - Measure the available available space in height, width and height. Cut Plywood to size - With a circular saw and framing square, cut all the required pieces out. You can use a sliding compound saw as an alternative. Attach the base and sides - Start assembling the sink cabinets by placing the bottom piece of plywood sheet on a flat surface. Attach the back and top boards - Place the plywood sheet for the top part of the cabinet and attach wood screws to connect it to both the sides. Turn the back faces of the cabinet upwards. Keep the back piece over the structure and fix it into place with wood screws. Attach shelves - Place the cabinet in an upright position to install the shelves. Slide a shelf into the structure so it is flush against the back. Attach door - Keep both hinges of the door on the same side of the plywood sheet. Drill them using wood screws into place. Now keep the door over the cabinet structure, extend the hinges to one of the side panels and fix them to make them secure. Fix a hasp closure on the other side of the door, placing it in the center of the hinges.