Thank you Groveraxle for the virtual ! you are too good a designer that is why I cannot help troubling you ;) you have your biggest fan in me ever since your first advice:)) As for an in-house designer I am certainly going to call somebody soon . Just that I get such a lot of options and great advice from highly accomplished and talented Houzz designers ..I would be better prepared after these conversations ..please forgive me for pestering you guys like this:)

Keya, glad you decided to take the one reader's idea about moving the armoires in front of windows that you don't need and giving the bed a wall of its own! And, yes, you can have Roman shades on one wall and layered drapes on the other. When I had drapes made for my tall sitting room windows/doors, I had them use the same fabric for the Roman shades for the smaller windows on the other wall. For me personally, in these older Indian homes with all the odd nooks and niches in the walls, perhaps it would be more soothing to have a light/med tone paint on the walls that blends with the drapes/blinds for an 'uninterrupted' look, and I would use the same color on ceiling and beams. (but that is just my thought) I would start the process with a large carpet with your favorite colors, then choose your Bedcover & cushions, then your wall paint and fabric for drapes/blinds ..Not certain what style you like, but if you really like a particular Ethnic bedcover fabric, you can always have them stitched into curtains or Roman shades too. Can't wait to see the "After" pics!

Ashish, The workmanship seems to be an issue with your stone cladding wall. Interlock joints are visible and dirty. This needs to be thoroughly cleaned and grey cement will need color touch ups. Some people go for a lacquer polish to enhance the look of the stones. However, it is equally repulsive for some people who like natural finish. Get a sample stone done first and then decide for the entire wall. It appears to be sandstone, hence it is better if it is coated with lacquer. Thanks, Nitin CORNERSTONE DESIGNS, Bangalore

Hi, I am from Assam, Guwahati. Yes it is warm humid place with lot of rains (like kerala). The bookcase is gradually drying. Fortunately last few days were very sunny and airy and my room has two big windows. Few mor details of my bookcase. It is 8 feet wide, 6 feet tall and 11 inch deep. It was attached with wall with 6 wall screw and has four pair of legs.I ask the carpenter to divide the bookcase into 3 part (32 inch each) and two door system for each part. Every part has 6 shelve from top to botom. There is no plywood or wood in back. I made it that way because the bookcase is attached in my room's inner wall I understand that the bookcase may have very little gap in between wall and wooden planks and i am ready for it. But I have no idea that beacuse of faulty mesurement, it became 1 inch gap between wall and sheve in the upper side. In lower side it is very minimum gap. I stop the carpenters to put the glass door. But now I see that they also make fault in making the doors. The doors are heavier that the shelf. The wooden planks are 1 inch thick while the door are 1.1/2 inch thick. I actually visit few hardwere shops here, but most have no ideas what to do and few says to apply wall putty to fill the gap. But my back wall is coloured (old wall, that why) and wall putty will not set on old wall and timber. I cannot remove it now from the wall otherwise the wall may destroyed. I really need a step by step guide now that what to do after the heves are dry, how to fil the gap and how to put the door without further damaging the shelf.