I am guessing that you want some kind of separation between dining room and kitchen? You want to keep steam and any oil in the air, from cooking, out of the dining room, stopping it at the ceiling with a wall but keeping the dining room open so the light from the large kitchen window can filter into the dining space? If I am right, the shape of an arch would best match the architecture of your house or of these rooms. An arch is an architectural element as well as a design element. It is possible though that an arch will be totally out of place in your space when a cleaned lined separation would look very nice. Hard to tell. Can you post a picture or give some verbal detail about the style of your spaces?

I am so happy to see you here! I will have to go back and see if i can retrieve my posts... thought I would make them into a little book for my daughter, with photos. Quick run-down on the bathroom (not travels, no time) - The kitchen has a rather elegant sliding door with beveled glass panels. Painted white, since this was the original colour. GD's new bathroom has the doors I had picked earlier; i thought of polishing them but decided sprayed automobile paint (on a resin primer) would wear better. Especially since it is such a small bathroom, and she is so splashy. I have this finish in my kitchen and it has lasted 15 years now. A tad chipped here and there, but only needs a wipe down once a week. Same finish for the balcony doors, also split like the bathroom. We have a new wardrobe, a study table with built-in shelves, and a small chest of drawers for her odds and ends. I want to re-tile the tiny balcony, more as a little statement. Currently we are looking at Portuguese tiles, though I did think a mosaic with a funky cat might be nice. Let me see the costing. The room will be painted a neutral adobe, with bright white woodwork and an off-white ceiling. This means she can go wild with cushions and covers. Other changes in the flat; We have changed the glass in the master bedroom and living room from small cramped panes to a single pane for each section with a 1" bevel all round. Doubles the cost of the glass, but looks so elegant! The air-conditioning is being re-located. The compressors were all mounted in the bedroom and living room balconies, which looked terrible and meant the balconies (very narrow, only 30" deep) couldn't be used for anything. Not even plants. So they are being moved so that the compressors can be mounted at the rear of the building. two down, one to go. Now we can put in some nice plants, fishtail palms etc. The kitchen counter on one side came out intact and will be reused elsewhere. I am planning overhead storage, cupboards, and a draining cupboard for plates and glasses. Right now there is no dish washer, though a place is earmarked, but for now I will put in a cupboard with steel racks for cups, glasses and plates, all hidden behind pressed glass doors. This is all in the planning stage.... Pictures in a little while, they are mostly on my ipad and don't transfer well to the mac. They come without numbers... so I have to rename the or something. Somebody tell me how to do this!

Hello @Cornerstone Design Studio India No. I don't have any idea about FSI. I will try to learn more about it. Regarding the size of green belt, I have confirmed it from the patwari that Plot 1 has got 5 metre green belt on both sides. He told me that: All plots with 24 metre facing road are having 5 metre green belt whereas plots with 12 metre facing road are having 2.5 metre green belt. (It's 4 or 3.5 metre in case of 18 metre road, I don't remember exactly). About that bold line, I am sure that it is not representing width of green belt. (Check below image as that bold line is having same width for 12 metre facing plots). So what do you think now? Should I become that lucky guy to own plot 1? Check out whole map and there are hardly 3-4 corner plots which are having 24 metre wide road on both sides. (and there are just 2 plots having North East direction) whereas there are around 50-55 plots which are similar to Plot 2nd. About your query, It's Suncity Township - I (Sector 35, Rohtak). It's around 45 kilometres away from Delhi border. Would you please mind elaborating this point a little bit more - "For us function prevails over design anyday". If built up area is going to be same in both plots then how it affects functionality? Thanks a lot for your detailed input.

Hello there, if you really want a trendy elevation, you need to be involved and be clear about your project's utility, usage, occupancy timings, overall theme and loads of technicalities. Anything could be projected trendy but it is purely a matter of perspective. Hence before you start researching on elevations, start consulting architectural firms for design as well. You could only get a clear picture through rigorous interactions only. There's basically no shortcut when it comes to Project Design. Either you or your firm needs to be involved fully or need to tender to competent firms. Regards, Aurum Ideas and Spaces India +91-9078942136