tamaltree, There are a few types of wood that don't take paint well. Heavy oily woods, like teak are the kind I mean. Most other kinds of wood will, so long as it is dry, clean and has a slightly rough surface for the paint to adhere to. If you are not a professional or an advanced amateur, don't try for the lacquer. It is toxic and highly flammable. Is that the information you were after?

http://www.bonito.in/2014/various-types-of-hinges-and-where-to-use-them/ Want to know various types of hinges and where to use them? This is the right article for you.

Debbie, acm - Thank you very much for responding. This is a new apartment and not a remodel. I have attached the floor plan of the room & closet. In the photo below the closet is the space "DRESS" and having dimensions 5 ft 11" (X axis) x 4 ft 7" (Y axis). For representational purposes, the diagram shows an L shaped closet. Ignore that - this is a complete blank space. I am instead planning on putting the closet along the 5 ft 11" wall- but on the opposite side instead of the side shown in the diagram. So imagine my closet along a single wall, set against the wall marked with a thick dark line. acm - I did not mean a bi-fold. But rather the traditional shutter door which some may refer as a swing shutter. My dilemma is - should i use sliding doors or regular doors ? I divided my closet into 4 major compartments, each 1 ft 6" wide. So there are a total of 4 doors. Depth of closet is 2 ft. Hence walkthru space is 2 ft 6". When a closet door is open, there wld be 1 ft space between the open door & the wall. Within each of these 4 compartments, I have designed multiple external drawers upto 2 ft height from base. So the shutters/doors planned only for the portion above 2 ft. Sliding Doors - Pros - Swing space not needed. Can place a slim dresser in the corner if I want to later. Cons - Expensive as it will needlessly cover the bottom-most drawers; Sliding doors coming off rails. Regular Doors Pros - Inexpensive. Can be used to cover only the part above the drawers (need not cover drawers). This way I can open the drawers below quickly & easily. Cons - Not sure if 2 ft 6" is enough clearance space to open 18" doors. Hope this makes sense. What do you suggest?

@corner Stone designs. sorry if I had given an impression it mud slinging. but objectively speaking the suggestion to go for a chimney just because someone asked for it instead of addressing the real issue us not what I intended to do. one has to understand all the negatives as well veggie going in for a decision . just like you have the right to suggest there is nothing wrong in pointing out the issues in the proposed solution. none of us are internet warriors but most of us are "sold" items that we will never need in our life by creating an illusion. I know that dinner call it business but I am not in such one and I have the luxury to call a spade a spade. Even now the person who asked for is not sure in what they want but they think that a chimney will solve the issue. engineering doesn't work that way. unless we know what the real issue us, which isn't clear if it is the smoke or the smell and the your of food cooked, the frequency, the 80/20 utility of the kitchen we are not even close to understanding the problem. my intent is to emphasize the importance of understanding the problem and then look for issue and not provide a ready made solution. we can all suggest something by seeing a picture that fire will come and catch the chef if it is located in the window but do you think that what you say is practical. you may construct this as much slinging be as a novice I have a genuine question. how many houses have such a fire accident. we don't even know if the stove is electric or gas. if it is electric then they just no question of fire. so I encourage you to objectively approach and not see this as a mud slinging thing as that's not the point.