OK... but the wire wont be lower as it is fixed now. The wire in the pics below is the wall facing each other. They were leveled on equal height but the beam on one wall makes it seem a little above. But i think you guys are absolutely right that up and down lights wont look good there. I think you are right about down lights lessismoore. Would it look good if i go with two different lights on opposite walls??? it would look odd right.

So many grays turn blue. after much trial and error for bdrm, bath and water closet , i'm happy with Benjamin Moore Horizon and Behr ultra in Burnished Clay. Neither look great on the card but they dry to a soft neutral gray. worth getting samples to try.

Greetings From Dream Design, As per your Inputs we are suggestion you some inputs -Look like 2 separate areas are created on 1st floor one is west and one is at east West Side -In west there are 2 joining bedrooms and One is double bedroom and one is single bed room room and there is common toilet at south side -Then at south side there is another double bedroom then it has joining washroom -In north there is lobby where is drawing room and kitchen is present -Balcony outside the drawing room East side -In East there is double Bedroom with attach washroom -In lobby there is drawing room and dinning room

Dr Gautam, We usually avoid using MDF in kitchen due to its screw holding strength. We woul recommend BWP ply as the base material. However some finishes do require MDF/HDF to be used as a base. Titus is a decent brand but please ensure you get easy replacement few years down the line for regular maintenance. Thanks, Nitin Cornerstone Designs Bangalore.