Hi again- I'm an Aussie and the term 'wood burner' means a metal box with a glass door on the front and in the situation where you have a 'double sided wood burner' that means two glass doors on each end. A wood burning fireplace open either side between two rooms is a different thing. Sorry about the confusion. I looked into building one of those in brick and was strongly advised to place a glass panel on one side ( as Ironwood has pointed out) the natural draughts that move through your home will take the smoke with it. A piece of glass will prevent this from happening.

OK... but the wire wont be lower as it is fixed now. The wire in the pics below is the wall facing each other. They were leveled on equal height but the beam on one wall makes it seem a little above. But i think you guys are absolutely right that up and down lights wont look good there. I think you are right about down lights lessismoore. Would it look good if i go with two different lights on opposite walls??? it would look odd right.

Perhaps a large round table might mean a rug is not at all necessary. It could be a metal tray table, or carved wood like Rebecca Mitchell Interiors illustrates. Ideas also to consider, using multiple tables can be found at http://www.houzz.com/multiple-coffee-tables. I also agree with comments above that some color is needed on the walls. You could then hang round mirrors, or an unusual curved shape like RMI shows above.

As far as spacing between the pavers, you want a minimum of 3mm or ⅛ an inch, but the ideal spacing really depends on the whole space and how you want to fill the space between pavers. If you are thinking about pea gravel or sand, you probably want less space between to help keep your costs down and make it easier to power wash. If you are looking to add greenery then more space between the pavers gives you more green, creating a more natural-looking space. If you do decide to go the gravel route, you can apply a clear coat of something like gravel-lok. It acts like glue, keeping the gravel in place. It may not be able to take the full force of a power washing, but it will certainly hold the gravel in place better than not having gravel-lok. If you do want to go for a green option, grass could work, You could also look into small succulents, moss, or clover. With any green option, you will have a little more maintenance in the form of trimming and watering, but the look is stunning! You absolutely can put grass between the pavers. It will actually help stabilize and hold the pavers not move them. (if installed correctly) I would space it 4” apart and use netfin or a similar subsurface drip line to water the grass underneath the soil. This look is probably my favorite but you could also use a crushed aggregate in between too. Gravel is a terrible idea because it doesn’t stay in place. Here are some ideas from our projects of all kinds of paver designs: