Wow, that's an ugly solution for wiring. I'm so sorry for you that it hasn't been done in a nicer way. Boxing it in would do the job, but you're not allowed to drill the walls. Was this done through or by your landlord/lady? I would talk to them and perhaps they will allow you to box it in. This looks horrible. Otherwise painting it white would probably be the best solution. Good luck.

Hi Manas, There is one option i.e. if you don't want to do any major changes you will have to take the wiring from sofa wall till TV wall and you can hide it using conduit. Or You can take a grove from one wall till the partition wall and get it filled. Partition is supposed to be a ply wall of 3 inches which will have framework in center and ply on either sides. We are attaching two reference images one with designer panel and one with plane. You can use whichever you like. We hope this will help you achieve your required design. In case of doubt, queries are most welcome. Best Regards Team Offroad

Most renders do not have finer details like switchboards, appliance wires, etc. The photo looks fine-tuned a bit though

Hi Ankur, I don't think hanging anything over the db is a good idea since there is no breathable space behind the door. the only available space would be equal to the size of the door stopper. Keeping this in mind the shelves would either be too narrow or the door would hit against the shelves perpetually. I would suggest go for a pvc shutter for the db and cover the wall and the db shutter with wallpaper keeping in mind that the shutter should be open able. We had a similar problem at a site and decided to just paint a mural over the shutter. Here are a few images to elaborate that. Regards, RnD Atelier Nagpur