I suggest you follow the step-by-step guide for creating storage cabinets under the bathroom sink. Take proper measurements - Measure the available available space in height, width and height. Cut Plywood to size - With a circular saw and framing square, cut all the required pieces out. You can use a sliding compound saw as an alternative. Attach the base and sides - Start assembling the sink cabinets by placing the bottom piece of plywood sheet on a flat surface. Attach the back and top boards - Place the plywood sheet for the top part of the cabinet and attach wood screws to connect it to both the sides. Turn the back faces of the cabinet upwards. Keep the back piece over the structure and fix it into place with wood screws. Attach shelves - Place the cabinet in an upright position to install the shelves. Slide a shelf into the structure so it is flush against the back. Attach door - Keep both hinges of the door on the same side of the plywood sheet. Drill them using wood screws into place. Now keep the door over the cabinet structure, extend the hinges to one of the side panels and fix them to make them secure. Fix a hasp closure on the other side of the door, placing it in the center of the hinges.

You can increase your master bedroom size by dismantling attached bathroom. - shown with red pen. Change the orientation of common bathroom and make it attached bathroom for master bedroom - shown with blue pen. Highlighted yellow area can be dismantled and your living room size can be increased or yellow highlighted area can be used for pooja room/store. Thanks - Anupam (Meraki4Designs - Bangalore)

Rahul, You may have to change your entrance to the center of the longer wall. Once you are inside the bath in the center will be a basin. On your right will be bath area and on your left will be the WC. This should address your parents concern as well as your wet and dry area concern. Thanks for your kind words, we understand that a home is probably most important possession of any family. Just trying to advise to make the process easier for a few. Thanks, Nitin Cornerstone Designs, Bangalore.

Hello there, There is a whole bunch of materials that could be used as a partition. Basically anything waterproof could be used as partition. What really matters in a small bathroom is the thickness. You could put a laquered glass fized partition available in a variety of colors. Regards, Aurum Ideas and Spaces Bhubaneswar