K khare,

This stone and the cabinet will fill in the space shown in pics completely? as in will it be touching the walls on three sides.?

cabinets can be made in pvc material..and 1st and 3rd option both are a good option.. preferably 1st option is best

@ Cornerstone design studio,
Yes, it will be touching the walls on all three sides..

In that case , wall hung cabinet would be able to support the slab and sink.

Is there a reason you want it it to be wall hung cabinet. You have made safe skirting space and even a floor mounted cabinet should be fine here.

Regarding material, for the carcass you can opt for granite vertical slabs and BWP ply shutters for floor mounted one.

But if you prefer a wall hung cabinet then a BWP ply carcass sould be good enough. The wall groove should be cut only on the longer side.

Thanks,
Nitin
Cornerstone Designs, Bangalore

The shower area is open and just adjacent to the washbasin.
That's why we wanted to have a wall hung cabinet or no cabinets at all below the basin to avoid future maintenance..

K Khare,

In this case, as suggested earlier, go for a granite stone carcass with just the shutters of BWP ply. Your taps are a bit too low is that a mistake or intentional.

Is it that the diverter tap is low??
The other three are concealed valves, we were not allowed to change there position by the builder..

K Khare, Their placements look a bit odd please check their purpose and decide.

The switch board will come very near to mirror unit and main water tap. It could have been on either walls.

Thanks,
Nitin
Cornerstone designs studio