A good tile installer that knows what he is doing, can easily remove that single piece of tile.... carefully replace it with another one. Do you have another extra pieces of the same tile? Do you know what brand and color the existing grout is? That will be more of the issue trying to get the grout match to match up or the finding the same tile (in the same dye lot) if you need to buy another tile. Did the heat cause the break or did a pan bang into the glass? Consider installing a heat resistant Lumicor or 3 Form panel behind the stove. Any flat material that can be sandwiched between two resin panels. 1). Crushed glass. 2). Fabric. 3). Fabric. 4). Fabric.

Hi, I am from Assam, Guwahati. Yes it is warm humid place with lot of rains (like kerala). The bookcase is gradually drying. Fortunately last few days were very sunny and airy and my room has two big windows. Few mor details of my bookcase. It is 8 feet wide, 6 feet tall and 11 inch deep. It was attached with wall with 6 wall screw and has four pair of legs.I ask the carpenter to divide the bookcase into 3 part (32 inch each) and two door system for each part. Every part has 6 shelve from top to botom. There is no plywood or wood in back. I made it that way because the bookcase is attached in my room's inner wall I understand that the bookcase may have very little gap in between wall and wooden planks and i am ready for it. But I have no idea that beacuse of faulty mesurement, it became 1 inch gap between wall and sheve in the upper side. In lower side it is very minimum gap. I stop the carpenters to put the glass door. But now I see that they also make fault in making the doors. The doors are heavier that the shelf. The wooden planks are 1 inch thick while the door are 1.1/2 inch thick. I actually visit few hardwere shops here, but most have no ideas what to do and few says to apply wall putty to fill the gap. But my back wall is coloured (old wall, that why) and wall putty will not set on old wall and timber. I cannot remove it now from the wall otherwise the wall may destroyed. I really need a step by step guide now that what to do after the heves are dry, how to fil the gap and how to put the door without further damaging the shelf.

Hi Puspa, Here are some ways in which you may convert an existing wall into a brick wall - 1] If you are alright with replacing the existing wall entirely, then terracotta bricks are your answer. A terracotta brick wall gives a rustic buy neat finish as compared to the conventional brick masonry. However, this would require major civil work. 2] Another way is to strip the existing wall of its plaster and expose the underlying masonry. You can protect this masonry with a lacquer coating (your painter will help you with that). However, this again required some amount of civil work. 3] If you want to work with the existing wall without breaking it, opt for cladding materials. You may go for brick like cladding materials like terracotta wall cladding. These come in a variety of colours and are easy to apply and maintain. They come for both interior and exterior applications. 4] Punning is another way of achieving the desired look on a wall. The painter or false ceiling guy can help you with this task. Basically he will pun the wall in pop and engrave grout lines so as to give it a brick wall look. 5] Lastly, you may go for brickwork looking wall paper or a 3d panel. While a wallpaper would look flat and unconvincing, a 3d panel would do the trick. You can either paint on the 3d panel or leave it as is. As far as procuring items locally is concerned, I am sure a local vendor or contractor will guide you through. Regards, RnD Atelier Nagpur

@Rock Doc: Are you addressing this to me? I haven't actually bought these tiles yet - when I do, I will definitely be going for the handmade ones. They're a work of art and irreplaceable in my opinion. However, there are also screen-printed tiles available in the market in more or less the same patterns; the workmanship is of course different, but you get them cheaper, and they're also more easily available. You could give that a shot. I'd recommend Aakaar Flooring Solutions - they're here on Houzz and are able to provide both the above-mentioned types.