I suggest that you try to find some plastic bins that are almost see-through and fit the space. That would be two for each of the lower shelves. You could pull out the bins to see what is inside and even label the outside. Or you could cut your plywood to fit the space and support it on the built-in shelves with bricks or purchased legs. The problem with this is that things in the back would be even more hidden than they are now. Then for the upper left you might be able to find a set of shelves that would fit. For the top right, I would put big soft things that you can grab and that won't hurt you when they hit you on the head! This might be extra bedding, towels, out-of-season clothes. For children's clothing I like to fold the whole outfit together, so that one doesn't have to hunt for the "matching" part. I think that your cosmetics could be in a small box that fits on top of other bins or clothing on shelves. Good luck. This will take some experimenting, but something will emerge.

the design looks great . According to me one side of windows can be used as bed wall . we can have blackout curtains or blackout window blinds . You can even play with drapery to define the area behind bed. We already have seating in the room so next we can do is give a console/ study table with an puffe / chair to it. also one can add a bench at the end of bed. Size you can check on your Autocad . Bed wall should be the focus when one enters the room, so I feel the bed should be placed like this . Dimensions of furniture and circulation space you can work on. Also WC should be on the washbasin side to avoid Future leakages and dampness in bedroom wall. all the best

Hi, I am from Assam, Guwahati. Yes it is warm humid place with lot of rains (like kerala). The bookcase is gradually drying. Fortunately last few days were very sunny and airy and my room has two big windows. Few mor details of my bookcase. It is 8 feet wide, 6 feet tall and 11 inch deep. It was attached with wall with 6 wall screw and has four pair of legs.I ask the carpenter to divide the bookcase into 3 part (32 inch each) and two door system for each part. Every part has 6 shelve from top to botom. There is no plywood or wood in back. I made it that way because the bookcase is attached in my room's inner wall I understand that the bookcase may have very little gap in between wall and wooden planks and i am ready for it. But I have no idea that beacuse of faulty mesurement, it became 1 inch gap between wall and sheve in the upper side. In lower side it is very minimum gap. I stop the carpenters to put the glass door. But now I see that they also make fault in making the doors. The doors are heavier that the shelf. The wooden planks are 1 inch thick while the door are 1.1/2 inch thick. I actually visit few hardwere shops here, but most have no ideas what to do and few says to apply wall putty to fill the gap. But my back wall is coloured (old wall, that why) and wall putty will not set on old wall and timber. I cannot remove it now from the wall otherwise the wall may destroyed. I really need a step by step guide now that what to do after the heves are dry, how to fil the gap and how to put the door without further damaging the shelf.

The hassle with square wood-look tiles is that they look too artificial. The only way to avoid that would have been to lay them with the grains alternately- vertical, horizontal- in a chessboard pattern. However, you do get tiles in 6" x 24" which you can lay in a break jointed pattern as shown here. They mimic the look of decking planks