This is to do with specific design rules - this is the brief history : Vastupurusa For the basis of Hindú architecture often reference is made to Vastupurusa or “the spirit of the site”. One legend explains this as follows. There was an evil demigod (bhuta) who was born during Siva’s fight with the Asur Andhaka. This bhuta possessed a terrifying countenance and an insatiable hunger. The legend goes that having done great penance, the bhuta won a boon from Siva that allowed him to swallow the three worlds that constitute the Hindu cosmos. As this being stretched himself and began to occupy the heavens, he fell flat on the earth. The various gods and demigods seized this opportunity and pinned various parts of his body to the ground, rendering him helpless. This being came to be called Vast (or Vastupurusa) because the gods and demigods managed to lodge themselves on his body. Legends hold that the deities, in pinning him down, occupied different parts of his body and continued to reside there (Figure1). In order to satisfy his hunger, Brahma ordained that he receive offerings from people on building sites before construction. It might be a good idea to get a local designer who is aware of Vastu laws to help with this ?! Check 'find a pro in my area'

I had purchased hafele hob 10 months back... I got it serviced 6 times... Now i requested for replacement with new one... Still they have not attended my request...

Hi Cynthia, thanks for your comment. I still haven't decided about lighting. First, I'm trying to get as much natural light as possible. If there are still some dark corners left, then I'm planing to use light on those areas.

I suggest you follow the step-by-step guide for creating storage cabinets under the bathroom sink. Take proper measurements - Measure the available available space in height, width and height. Cut Plywood to size - With a circular saw and framing square, cut all the required pieces out. You can use a sliding compound saw as an alternative. Attach the base and sides - Start assembling the sink cabinets by placing the bottom piece of plywood sheet on a flat surface. Attach the back and top boards - Place the plywood sheet for the top part of the cabinet and attach wood screws to connect it to both the sides. Turn the back faces of the cabinet upwards. Keep the back piece over the structure and fix it into place with wood screws. Attach shelves - Place the cabinet in an upright position to install the shelves. Slide a shelf into the structure so it is flush against the back. Attach door - Keep both hinges of the door on the same side of the plywood sheet. Drill them using wood screws into place. Now keep the door over the cabinet structure, extend the hinges to one of the side panels and fix them to make them secure. Fix a hasp closure on the other side of the door, placing it in the center of the hinges.