Thank you so much for your advice want to tell you that i'am using Scis Erica tiles on one side of the wall and grey on the remaining walls and the floor so what colour granite would you suggest would go with it, for tub ledge, will await for your reply . Thank you

Thanks a lot for your comment. I wouldn't exactly call it a walk in-closet. As you can see from the drawing, Its space provided for two single wardrobe (one on each side). Maximum width can be around 3.5 ft. The humidity point is quite relevant. The question is would it be possible to include a wet room in the space i.e. 6ft x 8.6ft. - considering I don't remove the dress wall. Wanted to get a sense on the possible layout. Thanks and look forward to your advise.

@Rock Doc: Are you addressing this to me? I haven't actually bought these tiles yet - when I do, I will definitely be going for the handmade ones. They're a work of art and irreplaceable in my opinion. However, there are also screen-printed tiles available in the market in more or less the same patterns; the workmanship is of course different, but you get them cheaper, and they're also more easily available. You could give that a shot. I'd recommend Aakaar Flooring Solutions - they're here on Houzz and are able to provide both the above-mentioned types.

I have the same kind of bathroom and saw the same video. I used an angle grinder to remove one of the walls. You have to have hearing, breathing, and eye protection. I don't think there is any way to avoid the dust. I'm going to direct a fan to an open window in the bathroom. My sinks are top mount so there was no problem removing it. I replaced the faucet only for now. I also changed out the drain and stopper. The old one was rusted to the sink. I had to bang on it with my loader from my tractor with the sink upside down to get it off, lol. I have put off removing the rest of the wall and the cabinet because it is such an ordeal. You might check with Daltile to see if they still make the tile. Maybe try cutting away the cabinet while keeping the counterop supported and then dropping it so that the joint gets more exposed? I'll be interested to know if you get to this before me but I'm doing an entire gut job.