OK... but the wire wont be lower as it is fixed now. The wire in the pics below is the wall facing each other. They were leveled on equal height but the beam on one wall makes it seem a little above. But i think you guys are absolutely right that up and down lights wont look good there. I think you are right about down lights lessismoore. Would it look good if i go with two different lights on opposite walls??? it would look odd right.

@corner Stone designs. sorry if I had given an impression it mud slinging. but objectively speaking the suggestion to go for a chimney just because someone asked for it instead of addressing the real issue us not what I intended to do. one has to understand all the negatives as well veggie going in for a decision . just like you have the right to suggest there is nothing wrong in pointing out the issues in the proposed solution. none of us are internet warriors but most of us are "sold" items that we will never need in our life by creating an illusion. I know that dinner call it business but I am not in such one and I have the luxury to call a spade a spade. Even now the person who asked for is not sure in what they want but they think that a chimney will solve the issue. engineering doesn't work that way. unless we know what the real issue us, which isn't clear if it is the smoke or the smell and the your of food cooked, the frequency, the 80/20 utility of the kitchen we are not even close to understanding the problem. my intent is to emphasize the importance of understanding the problem and then look for issue and not provide a ready made solution. we can all suggest something by seeing a picture that fire will come and catch the chef if it is located in the window but do you think that what you say is practical. you may construct this as much slinging be as a novice I have a genuine question. how many houses have such a fire accident. we don't even know if the stove is electric or gas. if it is electric then they just no question of fire. so I encourage you to objectively approach and not see this as a mud slinging thing as that's not the point.

Please Read, 1) Following are the photos of my Mumbai apartment (10th floor) kitchen. Water heater and water purifier were already (haphazardly) installed by my contractor before I came to occupy the apartment. Answer : u can shift the purifier above sink , inside the cabinet which will be made by carpenter. 2) We now have to install cabinets above the counter. ( you can ) no problem. 3) I want to get the PNG gas pipes installed to replace the existing cylinders. Answer : This work you can do after carpentry work. 4) When I saw other homes it appears I not only need pipes but some ghastly looking meters/ valves etc. Answer : meter will be hidden inside above cabinet toward right side and pipes will be inside the hob side counter will transfer through the balcony wall to meter again. 1) The gas pipes will come from the wall next to the balcony doors. The sink is just next to this wall. Will it be possible to install the pipes and meters below the cooking counter or is that not practical? - - Don't know what are all the practical considerations. Safety, access to meter to take readings, location of the sink? ). everything is possible.. 2) If under the counter installation is not practical, where should the pipes and other boxes/meters go? as mentioned above.. 3) Is there any practical solution to clean up the wall with water purifier and heater? (please note the kitchen has a 6" thick beam on the top of the wall above the counter, also 6" think pillars one in the corner and the other large one near the microwave as shown. Additionally it has a protrusion on the ceiling, probably this houses the drain for the apartment above me. ( for above apartment kitchen nahani trap chamber it is... )

Thanks for both of your responses CUBSpaces team and Shweta from Shades studio. It really gives a clarity about possible consequences. I am now doubt free about changing whole things in Bathroom as it will be interconnected. However will appreciate your opinion on few things: 1. Kitchen wall tiles: I have those from countertop height to roof(almost area of 6X15 feet) which are good and not hollow. I changed countertop 5 years back without any damage to these tiles. It might cost me another 10-15 K, but I feel the whole process and quantity of wasting old good tiles makes me little sad. 2. kitchen countertop: Made new around 5 years back. I don't expect to get it all intact. But large pieces can be cut and can be used as top for other freestanding structures like dishwasher, front load washer, heighten base cabinets, etc. 3. Plywood: I don't mind giving enough labour charges for old sheets recycle. I am planning to use doors, loose sheets(like kept on bed frame of settee frame.) or parts of big frames like settee. I am keen on reducing waste than to save money. You can see various DIY ideas by western people, who remove or sand laminates and re-paint furniture, or carefully remove hollow tiles and re-attach them. Some are also re-painting ceramic tiles. I am just asking myself: Are we creating more and more waste by use and throw approach every 10-15 years, just because we can afford it?