If the door is well painted I doubt if you will have a problem. A good coat of paint on wood work and wall surfaces is important if you have a lot of moisture in the room. If you can do some alterations to the space I would suggest you install an exhaust fan in the ceiling that vents moisture to the exterior, i.e. through the roof or side wall. Companies like Nu-tone and Broan make fans that have a moisture sensor that will kick on the fan while using the shower if you forget to turn it on. And these fans can be much more quiet than the typical bathroom fan. Some hundreds of dollars for the purchase and installation of this would be well worth it. I have seen bathroom ceilings covered with mold because the room has neither a neither a fan or window so you are right to be concerned.

I think you could make them white, just make sure your rooms all have a touch of black in the decor to tie those black frames in.

Rui, On the contrary, If you look from the left it should align with the base cabinet because they are in same size. Most likely, it will go off by 3/8 of an inch after the dish washer (as it has been wiggled in). It is too small a difference to be noticed by average person because they are at different heights. We are suggesting to change either the cabinet above sink or the single box above right of dishwasher. It will be easier and the filler will be least noticeable above the sink as the shutters are already of a different size. Good news, is that you may have the cabinet boxes already. You can check by placing them starting from the left most wall whether the above suggestion works for you. Thanks, Nitin Cornerstone Designs, Bangalore.

Thanks for both of your responses CUBSpaces team and Shweta from Shades studio. It really gives a clarity about possible consequences. I am now doubt free about changing whole things in Bathroom as it will be interconnected. However will appreciate your opinion on few things: 1. Kitchen wall tiles: I have those from countertop height to roof(almost area of 6X15 feet) which are good and not hollow. I changed countertop 5 years back without any damage to these tiles. It might cost me another 10-15 K, but I feel the whole process and quantity of wasting old good tiles makes me little sad. 2. kitchen countertop: Made new around 5 years back. I don't expect to get it all intact. But large pieces can be cut and can be used as top for other freestanding structures like dishwasher, front load washer, heighten base cabinets, etc. 3. Plywood: I don't mind giving enough labour charges for old sheets recycle. I am planning to use doors, loose sheets(like kept on bed frame of settee frame.) or parts of big frames like settee. I am keen on reducing waste than to save money. You can see various DIY ideas by western people, who remove or sand laminates and re-paint furniture, or carefully remove hollow tiles and re-attach them. Some are also re-painting ceramic tiles. I am just asking myself: Are we creating more and more waste by use and throw approach every 10-15 years, just because we can afford it?