The wall is stunning and creative, but sadly, I have to agree with the consensus expressed on all your threads: this wood should have been bone dry, carefully checked over piece by piece for holes, insects, existing fungus etc., and probably treated and certainly well sealed before before being installed. At this point, I would cut my losses and take it down. Once the pieces are all down, it's possible that if you thoroughly scrub off all fungus with a bleach solution, then let them dry bone dry (preferably in a wood kiln or perhaps a DIY drying shed), then treat and coat, these pieces could be reinstalled. Even that depends on the conditions they'll see - if this wall is exposed to lots of steam or grease you'll be having new issues before long. Also, is the wall itself dry and solid? Any chance water is leaking or oozing from somewhere and adding to the issue? What species of wood is this? Some species are naturally more fungus resistant and appropriate for this than others. Long story short, I'd recommend finding a different way to cover the wall - with ceramic, galvanized metal, or with a really scrub-resistant paint.

The wood has to reach what's called Equilibrium Moisture Content (EMC), which is different for various areas of the country/world. I don't know about end grain slabs, which is what you have, but the rule of thumb for lumber air drying (vs. kiln drying) is 1 year for each inch of thickness. Moisture leaves the end grain faster than the side and/or edge of the boards, so in your case the drying time will probably be shorter. If it is not dried in a controlled environment your slabs are going to split radially, due to drying too fast.

Your choices don't flow well to me. The flooring in your photo is pretty (very dark...are you okay with it showing every footprint, smudge, and dust bunny? If so, that's fine). From all of your options there I would do white cabinets with the Himalaya White granite. But you said ignore the granite. :) I would go for the gray cabinets with white quartz everywhere in that case, but personally I'd worry about gray cabinets being very dated in a few years. Is there another quartz option that you could pair with the white cabinets that is light in color and maybe has some movement, like LG Bianco Drift?

Hi. I hope the counter is thick enough to take the weight of the sink and water. atleast 25mm to drill in the undermount sink clips. Drill clips are available easy, you can look up Blanco and Franke EL undermount clips. If the counter is thin, you risk cracking while drilling, in which case it is better to use epoxy sink clips. A brand you can find in India is Solartime. They are expensive but you can get your local fabricator to make you a dozen clips and get them galvanised to prevent rusting. Do remember to apply silicone sealant between the undermount sink and the quartz generously. I know how you feel, things that are easily done in the west can be a pain to achieve in our country, especially places other than major cities.