Hi pankaj. Some lovely ideas above. Is that a door at the end of the passage? It strikes me, especially if you want to make the passage all white, that you might be able to give that door a special treatment to bring some drama to the end of the passage. That draws the attention to the door and away from the passage itself. You could just paint it a vivid colour. I think we tend to let our interior doors remain very plain and boring, when there is no good reason for that to be a rule. The one below would need some sort of backing for privacy, I guess, but I think to put metalwork on a door is a great idea that you could adapt in various ways. (Be aware of the dusting, though! Outside the rain will wash things clean, but not inside.) Also have a look at http://www.lushome.com/11-door-decorating-ideas-create-modern-interior-doors/58940 for some creative paint ideas -- I can't get those pictures to copy. I like the first one on that site. It's simple and geometric, and could very easily be adapted without hurting the budget.

Thanks a lot for your valuable suggestions and comments Rusty Empire,decoenthusiaste,emmarene & Chikka BangBang. My home is located in a small village in India. We initially planned to renovate our old home. But during the middle of renovation work, we changed our mindset to build a new one. Hence we made a house design by ourselves(3BHK) with the help of our local builder and to save the cost we tried to reuse all possible materials that were extracted while demolishing our old home((i.e.., like red tiles placed on the top of left side of porch). The project is in last phase, now I feel that still we could do something to enhance the beauty of exterior of home by getting some ideas from experts. I like to thank everyone once again for sharing your thoughts! @Rusty Empire : The entire building shown in pic is a single building, because of our inexperienced design it looks like disjointed:(:(. We just finished the painting of primer coating, yet to paint the final color. The pic you posted with color looks awesome, planning to paint the same color. I believe it would change the entire view of building @decoenthusiaste : The entire building shown in pic is a single building. Will post more pics in coming days, pls review it and share your thoughts. @emmarene : Right now I'm at my work place, so I don't have a main entrance pic with me. Will post it by this weekend. Please review it and share your valuable thoughts. @Chikka BangBang: That's gr8 idea, will think abt it. Thanks!

Go for Asian Paint Re-painting Process Repainting is done when your home is already painted once. It is required when you need to decorate the house afresh or old painted walls are not in good condition. Step I – Prepare Wall for Painting 1. Scrap the old paint using sand paper to remove falkes, loose particles. 2. Fill the cracks, pores, damages using putty – wherever required. Please note – putty is not required in re-painting in general, however one of coat of it can be used if walls are damaged badly. Step II - Apply Primer 1. Apply one coat of primer to smoothen the surface. 2. Let is dry for few hours. Step III – Apply Paint/ Designer Walls. 1. Apply two coat of paint successively after drying the first coat. 2. Or Get your texture/stencil/design work done Please Note- Primer is a must for Designer Walls. Fresh Painting What is Fresh Painting and when it is required? In general we do Fresh Painting in newly constructed home, apartments. In Fresh painting walls are completely rough. Some times in old houses fresh painting is also needed when its wall condition is really bad, damaged or outer layer of old paint is completely broken. Step I – Apply Primer and Putty. Primer is a preparatory coating put on materials before painting. Priming ensures better adhesion of paint to the surface, increases paint durability, and provides additional protection for the material being painted. So primer is always used in fresh painting. Putty is generally used for filling the minor cracks, wholes, damages to level the surface for painting. Putty is a generic term for a material with high plasticity, similar in texture to clay or dough, typically used in domestic construction and repair as a sealant or filler. 1. Apply One Coat of Primer, let it dry for approx 2 hours. 2. Apply One Coat of Putty on Newly Constructed Wall as base. 3. Let it dry for some time let say approx. 3-4 hours. 4. Apply Second Coat of Putty and Let it dry again for few hours. 5. Use Sand Paper for smoothening or levelling of wall surface. 6. Apply Second Coat of Primer after drying the putty. Step II - Apply Paint 1. Get the requested products which need to be used, verify the color code, pour the paint in bucket and mix some amount of water. 2. Apply first coat of paint using roller and brush. 3. Let it dry for some hours and apply the second coat of Paint. 4. Final touchup if finishing is needed. Take care of all above process

For the wall in the balcony I have shortlisted two stones A) Black leather finish granite B) Grey William granite. I am posting pictures of both. What can be pro and cons as I am looking for the exteriors wall only. Further for there will be window and steel/glass grill at wall of balcony so not sure whether book match pattern of grey William stone will work or not. I request whoever reading this to suggest which stone will look better at my elevation wall. Thanks a lot for reading this. Looking forward to get some positive suggestions.