OK... but the wire wont be lower as it is fixed now. The wire in the pics below is the wall facing each other. They were leveled on equal height but the beam on one wall makes it seem a little above. But i think you guys are absolutely right that up and down lights wont look good there. I think you are right about down lights lessismoore. Would it look good if i go with two different lights on opposite walls??? it would look odd right.

The wall is stunning and creative, but sadly, I have to agree with the consensus expressed on all your threads: this wood should have been bone dry, carefully checked over piece by piece for holes, insects, existing fungus etc., and probably treated and certainly well sealed before before being installed. At this point, I would cut my losses and take it down. Once the pieces are all down, it's possible that if you thoroughly scrub off all fungus with a bleach solution, then let them dry bone dry (preferably in a wood kiln or perhaps a DIY drying shed), then treat and coat, these pieces could be reinstalled. Even that depends on the conditions they'll see - if this wall is exposed to lots of steam or grease you'll be having new issues before long. Also, is the wall itself dry and solid? Any chance water is leaking or oozing from somewhere and adding to the issue? What species of wood is this? Some species are naturally more fungus resistant and appropriate for this than others. Long story short, I'd recommend finding a different way to cover the wall - with ceramic, galvanized metal, or with a really scrub-resistant paint.

Hello Rahul, limiting to your query on granite - It is quite a beautiful, natural and hard material. For applications in kitchen, store and balcony they would do good. There are some points you should consider for granite application - - Granite usually occur in dark shades so consider the lighting in the area of application. - Ask the vendor for iron content in any natural stone for avoiding rust marks. - The process of application and polishing is cumbersome but thank god in India, craftsmen are easily available. - Do not go for a elaborate gloss polish to avoid skidding/slippery floors. - It is also advisable to re-polish/reseal them every 3-5 years. Thanks, Nitin CORNERSTONE DESIGNS, Bangalore.

Hi Rishab, You can avoid creating 4" false ceiling and create 1.5 / 2" false ceilings just to let the wires hide and run within the false ceiling. I will not recommend conduits or exposee ceiling unless you wish to do a rustic interior design. You can go for Surface mounted lights and track lights. They are beautiful and are available in different shapes and sizes too.