You should be able to get everything that you want ........ Are you going to have a cabinet maker build it for you ? I suggest that you work with them and have them draw it up for you........Most cabinet makers are very good at working with their clients to get them what they want.

actually, to brighten up this dark and small feeling space, i'd look for a creamy base colored stone like khasmir gold or ivory gold, being sure to add an overhang on the island (if you like movement in the stone check out juprana granite) then exchange the pot rack over the island with either a pair of great pendants or a statement chandelier. from my own kitchen remodel experience i'll share you with you this: you'll get a much better price from a granite company then you will from a large home store ;) and be sure to take a cabinet door with you to shop. you can continue the granite onto the wall as a backsplash...they can cut the stone and make it go higher up the wall than the standard 3 inches which can be a great look. but if you really want tile, go for something simple that won't compete with the granite....like a cream colored subway tile. you can apply thim in a running brick pattern or a more modern stacked geometric pattern or even a herringbone. to control staining from food prep, don't use a white grout, use a slightly darker grout color that is inspired from the stone countertop. just remember that using a pattern on the countertop and another pattern on the backsplash can easily become overwhelming and then neither element stands out as the focal point. if you are spending a lot on a granite countertop, do everything you can to make it stand out as the best feature.

Hi Cornerstone, I read your feedback 1. Profile handles I was late as the doors were already ready and it was too much of re-work. Regarding putting handles 2. Sharp edge can cause problem thats why the handles I have put are rounded on the edge not to hurt. 3. Where I did make a mistake was Did not put fillers. If I had put fillers on the sides the door issues could be resolved The upper cabinet handles. This is actually not my fault I had told them to put the handles in the center but they thought these are not drawers but rather cabinets so they should be put in the location where we put the vertical handles. By the time I came to check it was too late and now I am stuck. I am thinking of putting maybe 8inch handles instead of current 5inch but not sure if that would help to improve the look. Old kitchen pictures attached they also had handles but smaller

A McSo. Couldn't the base of 15cm overhang be supported end to end with steel. As a single steel structure mounted on the larger cabinet area visible here. It should be sufficient for supporting the extension. Corbels will provide additional support but IMHO may not be required. Have you thought about an semi circular or a D shape counter to avoid sharp edges. Thanks, Nitin Cornerstone Designs, Bangalore.