Pankaj, I just realized that initially you told us that the bathroom area was 12'-0" x 9'-0" and later you mentioned that it was 11'-8" x 8'-0". In the last floor plan, I forgot to change the bathroom with the new dimensions. Below is the floor plan with the correct dimensions for the bathroom. The bedroom is ok, I drew it 19'-2" x 12'-6". The new layout does not change the way things are placed. Everything still fit. The only difference is that the vanity is now 4'-4" long instead of 4'-8". and the toilet is closer to the shower by 1'-0". Can you give me the lengths of the walls K and L. They are the walls between the vanity and the shower area. I will send you the new layout once you give me the length of these 2 walls.

I am so happy to see you here! I will have to go back and see if i can retrieve my posts... thought I would make them into a little book for my daughter, with photos. Quick run-down on the bathroom (not travels, no time) - The kitchen has a rather elegant sliding door with beveled glass panels. Painted white, since this was the original colour. GD's new bathroom has the doors I had picked earlier; i thought of polishing them but decided sprayed automobile paint (on a resin primer) would wear better. Especially since it is such a small bathroom, and she is so splashy. I have this finish in my kitchen and it has lasted 15 years now. A tad chipped here and there, but only needs a wipe down once a week. Same finish for the balcony doors, also split like the bathroom. We have a new wardrobe, a study table with built-in shelves, and a small chest of drawers for her odds and ends. I want to re-tile the tiny balcony, more as a little statement. Currently we are looking at Portuguese tiles, though I did think a mosaic with a funky cat might be nice. Let me see the costing. The room will be painted a neutral adobe, with bright white woodwork and an off-white ceiling. This means she can go wild with cushions and covers. Other changes in the flat; We have changed the glass in the master bedroom and living room from small cramped panes to a single pane for each section with a 1" bevel all round. Doubles the cost of the glass, but looks so elegant! The air-conditioning is being re-located. The compressors were all mounted in the bedroom and living room balconies, which looked terrible and meant the balconies (very narrow, only 30" deep) couldn't be used for anything. Not even plants. So they are being moved so that the compressors can be mounted at the rear of the building. two down, one to go. Now we can put in some nice plants, fishtail palms etc. The kitchen counter on one side came out intact and will be reused elsewhere. I am planning overhead storage, cupboards, and a draining cupboard for plates and glasses. Right now there is no dish washer, though a place is earmarked, but for now I will put in a cupboard with steel racks for cups, glasses and plates, all hidden behind pressed glass doors. This is all in the planning stage.... Pictures in a little while, they are mostly on my ipad and don't transfer well to the mac. They come without numbers... so I have to rename the or something. Somebody tell me how to do this!

Thanks Patricia and cpaul! I hadn't thought about glass. And I guess I should specify that a fully modular kitchen would not withstand the climate lol. The doors and Windows in General are traditionally made of teak wood and do warp somewhat but it's not a huge issue, so I fiured if all I am dealing with in the kitchen is the cabinet door it shouldn't be too hard to maintain. I actually ended up finding a blog about someone living in the tropical Philippine weather and how they covered their concrete counter with cabinets. Here is the link if anyone is interested http://myphilippinelife.com/our-philippine-house-project-kitchen-cabinets/ I think it turned out quite nice :) . This was their starting and final result. there are more photos in the blog. They basically recommended some prefabricated cabinets and strong hinges and screws for the wood frame.

Steel - it is heavy but most durable option but it is costly and may catch rust in a few years, However, you can treat it with chemicals to protect it from rusting.Heating capacity is fast. Aluminium/UPVC - Its light weight and durable, it is cheap but very bad against fire. UPVC would burn in seconds if it happens to catch fire. UPVC windows come with limited color options and same with aluminium ones. However, there are few companies who have now started providing wood looking UPVC windows.Moderately resistant to heat. Wood - Wood windows look very rich and you can mould it to any intricate details. It all depends on the quality of wood used, Old Burma Teak is the best wood. You get various options with polishing and painting. They are best to give a vintage look. Wood will cost you more but its worth the investment since they are maintenance free and with right wood chosen and treated, it will remain durable for years. Resistant to heat but catches fire. If you liked our suggestion, do write a kind review on our profile. It will help :) Thanks, Smit Bhagat