I had purchased hafele hob 10 months back... I got it serviced 6 times... Now i requested for replacement with new one... Still they have not attended my request...

The wall is stunning and creative, but sadly, I have to agree with the consensus expressed on all your threads: this wood should have been bone dry, carefully checked over piece by piece for holes, insects, existing fungus etc., and probably treated and certainly well sealed before before being installed. At this point, I would cut my losses and take it down. Once the pieces are all down, it's possible that if you thoroughly scrub off all fungus with a bleach solution, then let them dry bone dry (preferably in a wood kiln or perhaps a DIY drying shed), then treat and coat, these pieces could be reinstalled. Even that depends on the conditions they'll see - if this wall is exposed to lots of steam or grease you'll be having new issues before long. Also, is the wall itself dry and solid? Any chance water is leaking or oozing from somewhere and adding to the issue? What species of wood is this? Some species are naturally more fungus resistant and appropriate for this than others. Long story short, I'd recommend finding a different way to cover the wall - with ceramic, galvanized metal, or with a really scrub-resistant paint.

there is many types of support to be used for counter top for long lasting work... as ... 1) brick wall which takes 2" , 4" or 6" thickness space which is not good for below space as we will waste space for storage under counter... this is used where heavy material is used on top of counter for cutting any food items... 2) marble support... which will take 35mm thk space double support... 3) furniture base if the kitchen working person is using the sink properly for washing purpose and the gaps between the sink and counter top has to be sealed properly for leakage free to avoid any damages for below storage, as i will not prefer this in other area... this can be used only in foreign countries...

Nadia, You need to provide some more snaps showing the entire room, including the location of the beam, its height & clear height of the slab etc. One idea could be to extend the width of the beam by just about 25 mm with gypsum board on either sides, at the bottom level, with a right angular vertical of 25 mm as well & provide LED lighting strip for indirect lighting...